"Manic-Mechanic" 1,192 #1 Posted May 15, 2022 (edited) I found these NOS, not totally sure of fitment? Woods (RM59-3) Right Shield 25510 Left Shield 25511 Edited May 15, 2022 by "Manic-Mechanic" Share this post Link to post Share on other sites
pfrederi 17,147 #2 Posted May 16, 2022 The side shields on my WH finish mower do not have that internal baffle. The L59 I have doesn't have them either. Parts diagrm doesn't show baffle either...but the part number are correct 1 Share this post Link to post Share on other sites
"Manic-Mechanic" 1,192 #3 Posted May 16, 2022 37 minutes ago, pfrederi said: The side shields on my WH finish mower do not have that internal baffle. The L59 I have doesn't have them either. Parts diagrm doesn't show baffle either...but the part number are correct I had the Vender measure everything so fitment is not an issue the baffle was my concern. This is to be a mulcher so would the baffles hurt or shall I slice them off? Also, there is need to examine the underside to determine what all should be there as well. Have you made any fabrications to the underside/baffles on yours accordingly? Appreciated Share this post Link to post Share on other sites
pfrederi 17,147 #4 Posted May 16, 2022 No modifications no mulching 1 Share this post Link to post Share on other sites
"Manic-Mechanic" 1,192 #5 Posted May 16, 2022 (edited) 5 minutes ago, pfrederi said: No modifications no mulching So, no baffles and you have side chute? Or they have side shields, but not necessarily a mulcher per say? Always avoided the thought of acquiring one of these but they are getting hard to find... Edited May 16, 2022 by "Manic-Mechanic" Share this post Link to post Share on other sites
"Manic-Mechanic" 1,192 #6 Posted May 24, 2022 I finished up the side shields. The add-ons were not done as precisely as I would have liked. I could tell by the welders bill he wasn't to keen on such fabrications, took too much time if you ask me. Company made a discount but that's not what I wanted, rather pay more to get them done correctly! I had them trimmed and painted in about an hour Things change. All in all they will work well I think. 1 Share this post Link to post Share on other sites