2022 Big Show buy, sell and trade.

[adsm08 1,434]

I am looking for a pulley for an HY-2 pump.

 

I also have an 800 Special, with plow, that I'd be willing to let go, but I'm not planning to bring it down, unless someone wants it.  But a lot of you guys who come from points north, or take 80 or 81to the show, go very close to my house on the way in and out.

[Wheelhorse#1 1,445]

6 hours ago, squonk said:

No. It turns over by hand and has compression. It was in a barn and had sat for close to 20 years. Generator turns by hand also. 

 

Ok im thinking about it.sound like a good rebuild project. 

[squonk 38,936]

9 minutes ago, Wheelhorse#1 said:

 

Ok im thinking about it.sound like a good rebuild project. 

It's all there. I was out in the shop just now and spun it over again.

[Lane Ranger 10,495]

 

I have a limited number of replacement Wheel Horse 42 and 50 inch  SICKLE BAR  Mower Drive Pins for sale.

 

ONLY 3   and they are $40 each at the Bid Show.

 

This is replacement for part # 2680 and includes the proper Jam Hex Nut size 5/8 x 18.

 

 

 

Edited May 28, 2022 by Lane Ranger

[Mike'sHorseBarn 2,652]

Have a 68 Raider 12 that I'd like to send down the road. I got it from a widow whose husband used it to mow until he died. It's been sitting since 2018 and I never got around to getting it running. I do know the key switch is shot and it needs a front tire. Mower deck is in really nice shape. Asking $300.

 

 

[wallfish 15,923]

17 hours ago, Mike'sHorseBarn said:

Have a 68 Raider 12 that I'd like to send down the road. I got it from a widow whose husband used it to mow until he died. It's been sitting since 2018 and I never got around to getting it running. I do know the key switch is shot and it needs a front tire. Mower deck is in really nice shape. Asking $300.

Talked with my Dad and we're interested in the tractor for project to work on while we're there at the show. We'll take if it's still available

[Mike'sHorseBarn 2,652]

18 minutes ago, wallfish said:

Talked with my Dad and we're interested in the tractor for project to work on while we're there at the show. We'll take if it's still available

 

It's yours! Shoot me a pm.

[squonk 38,936]

4th generation K301/K321 cylinder head. Desired head for pulling. Spark plug directly over the exhaust valve. $ 40

 

 

 

Edited May 30, 2022 by squonk

[rjg854 10,738]

Looking for a starter/generator flywheel belt guard for my 1045 w/patina. This orange one doesn't cut it. Obviously it's for a 10 hp engine.

[Pullstart 59,732]

SOLD!  I have two tractors that I’m ok with selling.  If I decide to list other machines, I’ll update this post.  Well, maybe not.  But I could use the space and have the room to haul to the big show.

 

I ONLY HAVE ROOM FOR ONE OF THESE.  IF ONE SELLS, THE OTHER IS NO LONGER AVAILABLE FOR HAULING TO THE BIG SHOW.

 

1966 1056, with a later model 300 series muffler.  Runs good with no smoke, I’ve never retired it and the light circuit doesn’t currently work.  My guess is the wire got shorted and that’s where it stayed for the PO and for me.  It had 6” wheels but I swapped them for some 8” wheels and I believe it still has the 6” (taller) spindles.  The fronts are tubed and the rears have plastic weights and 4 link chains with cross bars.  The seat is comfy but torn as shown.  6 speed transmission with no apparent leaks.  The throttle knob pulled off (the cable is very sticky) and I have the steering wheel center but haven’t glued it back on.  I bent the PTO rod for clearance with the FEL previously mounted, but might be able to find a better one if interested.

 

Asking $450

Work Horse GT-1642 with Briggs Twin 16.  Runs good, may need a fuel system cleaning but honestly I don’t recall.  I’ve had it running with a borrowed battery and can’t even say if I’be driven it.  Good replacement seat with no tears.  1” axle 8 speed transmission with no apparent leaks.  Needs a battery.  Some apparent overspray/touch up with grey.  
 

Asking $300

 

AS MENTIONED, I ONLY HAVE ROOM FOR ONE MACHINE.  IF I SELL ONE BEFORE THE SHOW, THE OTHER IS NO LONGER AVAILABLE.

 

Edited May 31, 2022 by Pullstart

[Docwheelhorse 2,560]

Hi, I just PM'ed you... Ill take the GT1642 please and thank you. 

 

Tony 

[Pullstart 59,732]

38 minutes ago, Docwheelhorse said:

Hi, I just PM'ed you... Ill take the GT1642 please and thank you. 

 

Tony 

Oh good, I didn’t really want to sell my 1056 

[Rob J. 1,940]

On 2/14/2022 at 3:33 PM, stegs said:

do you have a mid mount grader blade by any chance?

 

Good luck, that’s what I need too. 

[Pullstart 59,732]

On 2/14/2022 at 1:41 PM, Pullstart said:

If anyone has any need for snow equipment, please let me know.  I have a good handful of snow plows and such.  
 

 

I have two 42” plows available. Asking $150 for the short frame and $175 for the long frame,  $15 for the transmission bracket.

 

 

[RJ Hamner 992]

Working on an old rotary mower (RM-324)

Looking for:  Lift rod part number 3545. &. Link and pin ass’y. Part number 4495

[squonk 38,936]

2 minutes ago, RJ Hamner said:

Working on an old rotary mower (RM-324)

Looking for:  Lift rod part number 3545. &. Link and pin ass’y. Part number 4495

I just broke one of those 3545 lift rods. Made a new one out of a 3/8" bolt.

[RJ Hamner 992]

19 minutes ago, squonk said:

I just broke one of those 3545 lift rods. Made a new one out of a 3/8" bolt.

If you have another 3/8” bolt….. I’d pay you for your services at the Big Show?????? 

Edited May 31, 2022 by RJ Hamner
Brain freeze

[squonk 38,936]

Bring a vise, hacksaw, torch, drill bits and drill press. I'll bring the bolt. 

[RJ Hamner 992]

[953 nut 51,720]

I'm having a reality check (just turned 77) and know that I need to begin selling off some of my herd. The 1055 was the one that got me hooked on  about twenty years ago and I probably will regret selling it but I seldom use it and would like to pass it on to someone who will continue to show it some love.

 

It is a 1965 model 1055 with a good battery and starts and runs awesome, smokes a little but as far as I know this is the original engine and has smoked a little for two decades. It has a nice @BOB ELLISON seat and serviceable tires that hold air/liquid. The fronts are Wheel Horse branded and show some cracks, the rears are Good Year and have been liquid filled with RV antifreeze.

 

The tractor comes with a short frame snow/dozer blade, wheel weights, chains and a 36" rear discharge gear drive mower in good condition (not shown). It has a cone type PTO (parts not mounted because of interference with the snow plow angle arm. The foot operated PTO for the mower deck is also included 

 

The going price for a good running square hood short frame tractor with a new seat would be around $ 600 or more. Short frame snow plow should bring $ 150. Wheel weights and chains are going for about $ 150. Rear discharge 36" gear drive mower should bring about $ 100.  Add it all up and it is a 1,000 value, but I am asking $ 800 for the package deal. 

This 1055 will move some snow!

 

[76c12091520h 3,296]

#6460 Hood, removed from a 1077. Solid, front grill is straight. Has a couple holes drilled in it but overall a good used hood $50.00 

[76c12091520h 3,296]

Front axle beam , 520 forward swept , $30.00 

[76c12091520h 3,296]

 Nice set of International Harvester 12 " cast iron wheel weights. Will fit Wheel Horse 12" rear wheels, and can be used on the insides of the rims if desired: SOLD 

Edited June 20, 2022 by 76c12091520h

[76c12091520h 3,296]

Brinley plow with sleeve insert , does not appear to have been used hard, excellent candidate for restoration or put it to work :  $150.00

[squonk 38,936]

Generac 3000 Watt generator on homemade frame. Generator mounts to frame with a single pin and 1 bolt. Easy hook up. Frame has wheels to roll unit around when off. Sigle bolt applies belt tension. Comes with belt also.  This is my favorite implement to display at shows.

 

$350.00  SOLD!!! 

 

 

 

 

 

 

 

 

 

 

 

Edited June 9, 2022 by squonk