Fender Pan From Plastic To Metal

[WH854 44]

I am going to put a metal fender on my C-105, here is the start!

Under Coat

Bottem

Bottem Painted

Have to wait 48 Hours to paint the Top.

Got this on ebay for $10.00

Think it will work?

Chas :thumbs2:

[bo dawg 478]

I believe its gona be a dandy looking one!

:thumbs2:

[TJ 171]

Looks good. :thumbs2:

[Duff 206]

You got yourself a good deal, Chas, and the redo is coming along really nice!

Duff :thumbs2:

[d180man 5]

Hi look good i need to do that too! to our c-161 :ychain:

[WH854 44]

Update on fender pan!

Not to bad for an old man. (None painter)

Chas :thumbs2:

[WH854 44]

Update put fender pan on tractor, plus new seat new bolts new gas guage and cap.Here is a couple of pictures!

Chas :thumbs2:

[JimD 3,345]

it looks real good chas :thumbs2:

[WH854 44]

I have some more picturesof my C-105

New Decal on back

Got the engine back about a week a go new gov.gear,Exh valve,new points,H10C plug,block bored to .020 over Crank ground with Rod insert.installed engine in tractor,tried starting it would not fire.So I disconncted fuel pump an rigged up a gravity flow gas tank,Hit key again she fired right up, bad fuel pump.So I bought a new replacement fuel pump mad out of hard plastic,it is working fine so far,oh yeah a new starter,new fuel line.I have been running up an down our road. The TWP Road Dept.has it closed down temp.

If this is in the wrong setion you Mods can move it.

Chas :ychain:

[WH854 44]

Here is That gravity feed I was talking about.

That is the muffler in front.

Chas.

[TT-(Moderator) 1,128]

Glad to see you got the Horse back up on it's feet again, Chas!

Who did the connecting rod bearing insert for you?

[WH854 44]

Thanks TT Itook it to Mulligan's Small Engine Repair 3136 William Flynn HWY.

Slippery Rock,Pa.16057 phone or Fax(724)794-5723.But he send them out to get block bored, crank done, got to be in the area $35.00 For Bore job, $125.00 for crank and insert job.

Chas. :thumbs:

[WH854 44]

More pictures of my C-105

These are the patch job on the deck.

These are after I got deck back on tractor.

That is my helper in this one

I got this all installed today.Tried it out for about an hour,the mower worked perfect

gotta give myself some attaboys.

Chas. :thumbs:

[Rod(NASNUT) 1]

Nice job. Looks great :thumbs2:

[Save Old Iron 1,563]

Chas,

what type of material did you use to patch the mower deck ?

[WH854 44]

I don,t weld! But i took it to a friend of mime in the body shop business. he told me he used a piece of metal from, metal beams they use in buildings It was galvanised I believe. he used one of those wire welders.

Chas :thumbs2:

[HorseFixer 2,012]

Looks good Chas Duke approved :thumbs:

[WH854 44]

A great Big to all you guys for the compliments. I did not think I would ever get this far with it.I guess I am a stubborn old cuss, not to give up on her.She rewarded me today, I mowed about an acre of grass (weeds)included.Grand Old Tractor. Chas :thumbs:

[WH854 44]

Guess I'll drag this out of the archives too

Chas

[Butch 194]

Sweet!

[oneroadkingman 53]

wow I must say that is a nice looking tractor u got there. I hope I can do half is good of a job with mine as you did..

[WH854 44]

wow I must say that is a nice looking tractor u got there. I hope I can do half is good of a job with mine as you did..

Thank Ya Mate

Chas

[608KEB 794]

Looks nice.