Dozer blade-will it fit?

[rallysman 0]

I found this blade for sale for a reasonable price. How can I tell if this will fit a C-120? The owner doesn't know a model number or what it came off of.

Thanks in advance for all of your help.

http://uglygreencouch.net/pics/main.php?g2..._serialNumber=2

http://uglygreencouch.net/pics/main.php?g2..._serialNumber=2

http://uglygreencouch.net/pics/main.php?g2..._serialNumber=2

http://uglygreencouch.net/pics/main.php?g2..._serialNumber=2

The dimensions I was give are: "Its frame is 67in. long,11 5/8 inside on the back and14 3/8 on the out side on the back.. blade is 42in. wide"

[MaineDad 87]

It should fit a C-120. You will need the rear bar that is used to support the plow frame in the rear axle brackets though...

[rallysman 0]

Thanks for the reply. Is that something that I could fabricate if the bar isn't included?

[MaineDad 87]

I am sure someone on RS has one they could sell cheap. But yes you could fab one. It just needs to be long enough to put hitch pins through each side and be able to fit in the axle hitch. You may want to post in the Wanted section

[rallysman 0]

Awesome. Thanks for your help!

[rallysman 0]

Well, thanks for the help on this. I learned a couple of things. 1: This style of blade should fit my tractor, and 2) Don't trust the mouth breathing slack jawed yocal that was selling it!!!

Dear Mr. (insert craigslist seller here): If you're reading this, I hope you got your payment, and I hope it makes up for your reduction in positive Karma.

I don't appreciate when things are sold out from under me. Next time refrain from giving your address and phone number to someone you plan on screwing over. Usually people that get screwed do more than rant on the internet.

Thank you for only wasting my time in email and on the phone rather than forcing me to waste it on meeting your physical cowardly waste of flesh and oxygen.

DIAF

Sincerely,

Rallsyman.