moe1965 766 #1 Posted December 19, 2021 I'm assuming this is a oil spot for the peddles. If so I'm gona put a grease gitting there Share this post Link to post Share on other sites
RED-Z06 2,582 #2 Posted December 19, 2021 18 minutes ago, moe1965 said: I'm assuming this is a oil spot for the peddles. If so I'm gona put a grease gitting there My experience is there is usually so little clearance there that grease doesn't want to flow in, i use a oil can to put a few drops in them periodically 2 Share this post Link to post Share on other sites
Darb1964 1,120 #3 Posted December 19, 2021 I think it's for a grease fitting. Share this post Link to post Share on other sites
Sparky-(Admin) 23,266 #4 Posted December 19, 2021 I don’t think it’s threaded for a grease zerk. I just put a few drops of oil in every so often. 2 Share this post Link to post Share on other sites
pfrederi 18,709 #5 Posted December 19, 2021 10 minutes ago, Darb1964 said: I think it's for a grease fitting. To small you would have to drill it out and tap it. Oil works just fine 3 Share this post Link to post Share on other sites
SylvanLakeWH 28,539 #6 Posted December 19, 2021 Oil drops a few to times a year… 2 Share this post Link to post Share on other sites
Lee1977 7,221 #7 Posted December 19, 2021 My Scout Master was a machinist he was fixing up an old worn out mower for a neighbor new axle bushed the wheels. He was drilling a hole in the hub when the fellow ask what was the hole for. He told him it to let the smoke out, he new they would never oil it. 1 4 Share this post Link to post Share on other sites
