Jump to content
Maxwell-8

KT17 problems begin

Recommended Posts

Maxwell-8

My c175, was needed yesterday, so I did rewire on it. Came out to start it today. the coil is not working. I left the cables on the coil. coil gets 12v. points and condenser are getting power trough the coil. plugs are good. Tried some sparkplug cables I know work. Still no spark

 Bought the engine running, and tested here a couple of weeks ago. 

previous owner just had a new coil installed...

Is it true these are Harley Davidson coils?

DSC_0600.JPG.0135a595e41d128834eaf694b58fc358.JPG

Share this post


Link to post
Share on other sites
 
953 nut
4 hours ago, Maxwell-8 said:

Is it true these are Harley Davidson coils?

looks like a Harley coil to me.    Try removing the wire to the condenser, it will run without one but won't run with a bad one.

  • Thanks 1

Share this post


Link to post
Share on other sites
 
edgro

I have had coil issues also on 417A, tried a couple different things, no luck. You can now get oe style coils for a reasonable price on *bay. Not saying thats the cure, as it is no spark again. On the other hand, my C175 has never had any problems

  • Thanks 1

Share this post


Link to post
Share on other sites
 
Maxwell-8
9 hours ago, 953 nut said:

looks like a Harley coil to me.    Try removing the wire to the condenser, it will run without one but won't run with a bad one.

I will try a new oem one.

DSC_0275.JPG.2b2d041d73c18a19296f1a72424a0220.JPG

Share this post


Link to post
Share on other sites
 
peter lena

@Maxwell-8 looking at your issue , leave nothing to chance, especially the  RELATED GROUNDING DETAIL , verify each stage , for power and ground , use serrated washers and dielectric grease , small wire brush every bolt down or contact area .grease, insure your wire make up is solid , eliminate tight wiring and possible chafing ,  I  regularly use a small " wire wrap  " to contain  and secure my wiring , to a support area. just an idea , that i follow , pete  

  • Thanks 1

Share this post


Link to post
Share on other sites
 
pacer

Is it my imagination, or does a KT series have an .... appetite for coils/ignition?? Seems they pop up pretty often with problems.

 

I had a 17 that I got for a song, because the guy couldnt get it to run, no spark. I had picked up a couple old Harley coils at a flea mkt for $5 and it started tight up. These were similar to conventional coils, just had 2 wire outlets. The coil youre showing is also the coil that is on the D series twins (18-20hp) From your description, seems you have cked all that I would have done, so I dont have any ides

Share this post


Link to post
Share on other sites
 
pfrederi

Have had 3 KT17s for several years no coil issues...

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...