Jump to content
CletisNester

Kohler 301S Oil Seals

Recommended Posts

CletisNester

Can anyone tell me the correct Part Number for A Kohler 301S Engine, Flywheel End, Oil Seal? I have ordered from three different sources, but I keep getting the wrong Seal. The Shaft Diameter on the flywheel end is 1.5 inches. The seal recess in the end plate is 1.985 Inches. The seal needs to be a few thousands of an inch over two inches to effect a press fir seal. Any Help would be much appreciated . Sincerely, Cletis M. Nester, ncletis@yahoo.com.

Share this post


Link to post
Share on other sites
 
gwest_ca

Not aware of the seal dimensions being available. If we knew the seal part numbers there may be a way to get their dimensions.

Can you post the spec number off the engine?

Share this post


Link to post
Share on other sites
 
CletisNester

Spec Number for my Kohler K301S is 47812

20 hours ago, gwest_ca said:

Not aware of the seal dimensions being available. If we knew the seal part numbers there may be a way to get their dimensions.

Can you post the spec number off the engine?

 

Share this post


Link to post
Share on other sites
 
Searcher60
11 hours ago, CletisNester said:

Spec Number for my Kohler K301S is 47812

 

 

 

Kohler part number is in this link, along with dimensions. Common seal, Should be able to get one anywhere. See Kohler manual for correct installation depth in cover. 

 

 https://powermowersales.com/stens-495-622

Share this post


Link to post
Share on other sites
 
Gregor

4703206s

poke here

Edited by Gregor

Share this post


Link to post
Share on other sites
 
gwest_ca
2 hours ago, Gregor said:

4703206s

Is this not correct?

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...