porkchop 1 #1 Posted June 21, 2009 I have 2 1974 D 160,s I went to change front tires and wheels from one to the other and found that 1 has much larger spindles than the other. The axle looks the same. Can I change axle, spindles and all from one to the other???/ Or are the whole axle assemblys different??? :thumbs2: Share this post Link to post Share on other sites
d180man 5 #2 Posted June 21, 2009 Hi you should have one that is 1" and a 3/4" as for as i know the axle is the same? but i have never had to change one ! but i would just pull one to see or just drop the axle to see if it would work but i do think they are the same ! good luck with it ! :ychain: Share this post Link to post Share on other sites
Jim_M 179 #3 Posted June 21, 2009 The Axles are easy to switch from one tractor to the other. They're the same at the center and use the same center pin. Share this post Link to post Share on other sites
d180man 5 #4 Posted June 21, 2009 The Axles are easy to switch from one tractor to the other. They're the same at the center and use the same center pin. hi that is what it thought ! but i have been luck and never had to change one! :thumbs: Share this post Link to post Share on other sites
