TJ5208 1,823 #1 Posted October 22, 2021 How would i connect the wires for rhe lights I can't tell what I need to connect to get the lights to work. There's another switch in there thats why tha on wire is running back ther but the switch in closets to the camera is the one i need to connect the lights to thats the one under rhe cigar lighter Share this post Link to post Share on other sites
Achto 26,501 #2 Posted October 22, 2021 Page 4 in the manual shows how to run the wires for the lights. 1 Share this post Link to post Share on other sites
Gregor 4,838 #3 Posted October 22, 2021 (edited) Wire from cigar lighter to switch. Wire (with inline fuse) from switch to lights. Lights must be grounded of course. Edited October 22, 2021 by Gregor 1 Share this post Link to post Share on other sites
echris 1,425 #4 Posted October 23, 2021 Pro Tip: When troubleshooting lighting, do not use the beep function on your multi-meter. While troubleshooting an intermittent short/blowing fuse on the headlights on my 310 last year, I'm not proud to say it took me much to long to realize that the dead short to ground (BEEEP) was, in fact, completely normal. Lightbulbs are quite literally a high impedance short to ground. Use the impedance function instead. I... ummmm.....duh.... Share this post Link to post Share on other sites
