mike67 33 #1 Posted October 9, 2021 (edited) Picked this up a few years ago. It was a bit rough but it was intact and free. After I got it running it sat for another couple years, until I decided do something a month or so ago... I wanted a different look so this is where I went. Kenda Bear Claws in back, Carlyle X-TRACs up front. Changed pulley sizes for a top speed of 12-13 mph. Its alot of fun on the trails! Edited October 9, 2021 by mike67 Autocorrect hates me 5 4 Share this post Link to post Share on other sites
Skwerl58 633 #2 Posted October 9, 2021 It looks like it would do well on the trails. I was just thinking about wit the increase in speed do you need to be concerned with the front spindles and wheel assemblies? Share this post Link to post Share on other sites
Sparky-(Admin) 19,534 #3 Posted October 9, 2021 At first I thought that was an interesting paint scheme….but a closer look makes me think it’s decals..yes/ no? Share this post Link to post Share on other sites
mike67 33 #4 Posted October 9, 2021 (edited) So far the spindles and wheels etc are holding up fine but I really slow down when it gets rough. The gray is mat paint, the rest is mat vinyl I cut into random shapes. (except the screen over the flywheel, which is painted). If/when I get tired of it I can peel the vinyl off and go with something different. Edited October 9, 2021 by mike67 Autocorrect still hates me Share this post Link to post Share on other sites
