68 raider 12 3 #1 Posted August 30, 2021 I have a gt14 and found a wheel horse rototiller with no model numbers on marketplace. Are most rototillers universal for the older models? 1 Share this post Link to post Share on other sites
pfrederi 18,538 #2 Posted August 30, 2021 GT-14 tillers are sort of unique they ran directly off the hydro pump pulley ( a special double sheave pulley that is fairly rare). and you need the three point hitch. 1 Share this post Link to post Share on other sites
daveoman1966 3,836 #4 Posted August 30, 2021 Use the Toro Master Parts Viewer here: https://lookup3.toro.com/partdex/index.cfm?xCaller=Toro Just enter GT-14 as the model, then clik to next page where your model # is shown. Clik on that model #. Then clik 'Accessories and Attachments" . Scroll down to see tiller is either 7-1221 or 7-1232 depending on model of your tractor. 1 Share this post Link to post Share on other sites
WHMan2012 170 #5 Posted February 20, 2022 Just curious if anyone out there attempted installing a C-Series Rototiller on the back of one of these tractors yet ? I'm in the middle of repowering as GT-14 I had given to me and I'm going to fab one up for the back of mine just wanted to see if I was the only to consider this move that's all. Thanks for your time Share this post Link to post Share on other sites
