K181 Starter help

[buchshot12000 21]

 So my starter got jamed up on the flywheel. When I got the covering off I noticed a tooth was missing. 

I got the starter gear free. but now it engages the flywheel, but the shaft spins inside the gear. 

does any one know where to get parts? or should i get a replacement?

[953 nut 51,497]

Try Jack's              https://www.jackssmallengines.com/Products/KOHLER/Starter-Part/s

 

[pfrederi 17,125]

13 minutes ago, 953 nut said:

Try Jack's              https://www.jackssmallengines.com/Products/KOHLER/Starter-Part/s

 

  Not to go off topic but Jack's is now part of Northern Tool&Equipment

[gwest_ca-(File Mod) 10,478]

The Bendix drive is not fixed to the armature shaft. It slides in and out on a twisted spline. With the starter motor turning the spline forces the gear into the flywheel and when the flywheel speed exceeds the starter motor speed it forces the drive back to the starter.

There has to be less expensive parts available from after-market suppliers.

Here is a parts list to help you determine what you need.

Let us know what you need so we can assist.

 

[Jeff-C175 7,195]

15 minutes ago, pfrederi said:

Jack's

 

I haven't been too keen on them for a while now.  I have had issues with the past few orders.  Mostly delays with shipping orders.  I don't think they actually stock the parts themselves any longer.  It seems to me that they are now 'drop shippers' and they don't have their supply channels set up very well yet.

 

I think "Pat's Small Engines" might be a better bet.

http://www.psep.biz/

 

[buchshot12000 21]

Thanks all,

Looks like the parts i need are no longer available, guess im going to find a replacement

 

[Jeff-C175 7,195]

5 minutes ago, buchshot12000 said:

parts i need are no longer available

 

Not this drive gear assembly?  (this may only be for the aftermarket starter that they sell?)

 

Give Pat's a call... 

http://www.psep.biz/store/kohler_41_098_08-s_starter_motor.htm

 

or check with Lincoln at A-Z Tractors, he can typically supply good used parts for purt near any WH need.

https://a-ztractor.com/  <--calling on the phone is the best way!

Edited August 29, 2021 by Jeff-C175

[squonk 38,844]

Is this a starter that has the mounting holes in the top instead of the bottom? If so I have one here I'll let go cheep! Let me know.

[buchshot12000 21]

6 hours ago, Jeff-C175 said:

 

Not this drive gear assembly?  (this may only be for the aftermarket starter that they sell?)

 

Give Pat's a call... 

http://www.psep.biz/store/kohler_41_098_08-s_starter_motor.htm

 

or check with Lincoln at A-Z Tractors, he can typically supply good used parts for purt near any WH need.

https://a-ztractor.com/  <--calling on the phone is the best way!

ah i missed that, I need to pull it apart, and figure out why the gear engages, but the shaft just spins.