Wheel Horse312-8 2 #1 Posted June 25, 2021 (edited) Hello, I have a 2003 417xt with a PTO that won’t engage. Midway thru mowing the lawn, after I backed up, it would not re-engage. I can’t on initial inspection find any obvious shorts/frayed wires and I bought a new switch but that didn’t help. Any suggestions would be greatly appreciated. thanks Edited June 25, 2021 by Wheel Horse312-8 Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,391 #2 Posted June 25, 2021 One I have not added any color to yet but working on it. Two of the pto pages included with more to follow 1 Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,391 #3 Posted June 26, 2021 After all that I did the wrong year but looking back 1993 is the same. Can be downloaded in pdf format if you want larger image 1 Share this post Link to post Share on other sites
Wheel Horse312-8 2 #4 Posted June 26, 2021 I’ll take a look thanks, I checked the seat safety, but that’s working fine Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,391 #5 Posted June 27, 2021 If the reverse switch can't close the pto will not work. Here is the complete 2003 file Garry 1 Share this post Link to post Share on other sites
Wheel Horse312-8 2 #6 Posted July 7, 2021 I needed to replace the NMIR module, all good, while I was down there I replaced all the belts, running great! thanks for everybody’s help! Share this post Link to post Share on other sites
