DieMakerDave 0 #1 Posted May 28, 2021 I have a 2000 268H and while cutting the grass the mover deck will randomly shut off. It doesn't seem to matter if I turn the reversing switch on under the seat or not. If I lift off the seat the engine dies, so it doesn't seem to be the seat switch. The dash indicator light for the blades has a slight flicker to it, if that means anything. Thanks Dave Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,393 #2 Posted May 28, 2021 Welcome to the forum. There are also good pages to diagnose the specific switches and controls. They are likely covered in this service manual Garry Share this post Link to post Share on other sites
DieMakerDave 0 #3 Posted May 28, 2021 Thanks Garry, I'll take a look at these. Share this post Link to post Share on other sites
DieMakerDave 0 #4 Posted June 1, 2021 Sometimes you need to just start at the basics, ground was loose at the engine mount. Share this post Link to post Share on other sites
