12 hp Kohler 1,020 #1 Posted March 30, 2021 Picked up a Cub 124 puller project yesterday. Upon further investigation of the engine I noticed it came factory with no governor. It’s a kohler k301AT, I’m guessing there pretty uncommon as I have never seen one before. Belive it’s out of an arctic cat snowmobile. Anybody have more information on it ? Does it have stronger internals to run at higher rpm ? Share this post Link to post Share on other sites
The Tuul Crib 7,339 #2 Posted March 30, 2021 That is a little odd. Dont most pullers bypass the gov anyways? Share this post Link to post Share on other sites
12 hp Kohler 1,020 #3 Posted March 30, 2021 3 minutes ago, The Tuul Crib said: That is a little odd. Dont most pullers bypass the gov anyways? I believe so, makes it a perfect engine for a puller. Just seems a odd that it never had one Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,472 #4 Posted March 30, 2021 https://www.partstree.com/models/k301-47297-kohler-k-series-engine-made-for-arctic-enterprises-12hp-9kw/ Garry 1 Share this post Link to post Share on other sites
seuadr 489 #5 Posted March 30, 2021 Guess that makes sense for a snowmobile. wonder if it has inserts in the rod and/or if it is one of those forged rod? 1 Share this post Link to post Share on other sites
pfrederi 18,664 #6 Posted March 30, 2021 They did leave out balance gears but rod and piston are the same as all other K301. No air cleaner just a shield to keep big chunks out... 1 Share this post Link to post Share on other sites
