TJ5208 1,841 #1 Posted March 8, 2021 Has anybody have a oil pressure gauge or gauges on there with horses I thought about trying that on the Raider 10 when I can get it like the RPM gauge and pressure gauge and the voltmeter gauge and while the rest of the gauges Share this post Link to post Share on other sites
pfrederi 18,714 #2 Posted March 8, 2021 Raider 10 is a splash lubricated engine. no oil pump no pressure... 2 Share this post Link to post Share on other sites
TJ5208 1,841 #4 Posted March 8, 2021 any other gauges work Share this post Link to post Share on other sites
Stepney 2,354 #5 Posted March 8, 2021 I guess you could add a voltage, hour, or ammeter gauge. Not much you can really add to that machine. They never originally had anything at all. Didn't much need it, the engine was self sufficient with it's magneto once started. If it didn't start, clearly either the battery was dead, or the alternator had failed. K.I.S.S. goes a long ways on these older models. 1 Share this post Link to post Share on other sites
meadowfield 2,758 #6 Posted March 9, 2021 My C-121 is all gauged out 2 1 Share this post Link to post Share on other sites
ranger 1,807 #7 Posted March 9, 2021 37 minutes ago, meadowfield said: My C-121 is all gauged out Wow! Mark, that’s certainly a low hours tractor. 1 Share this post Link to post Share on other sites
meadowfield 2,758 #8 Posted March 9, 2021 2 minutes ago, ranger said: Wow! Mark, that’s certainly a low hours tractor. hahaha, high hours, but never had an hour counter! turns out this hour counter - was boxed wrong - it's a mains one, so this has failed to clock an hours use 1 Share this post Link to post Share on other sites
TJ5208 1,841 #9 Posted March 9, 2021 Nice gauges how did you do it Share this post Link to post Share on other sites
TJ5208 1,841 #10 Posted March 9, 2021 What gauges did you get maybe links Share this post Link to post Share on other sites
Handy Don 14,129 #11 Posted March 9, 2021 2 hours ago, ranger said: Wow! Mark, that’s certainly a low hours tractor. 3 hours ago, meadowfield said: My C-121 is all gauged out So is that fuel gauge US or Imperial units? Share this post Link to post Share on other sites
meadowfield 2,758 #12 Posted March 9, 2021 1 hour ago, Handy Don said: So is that fuel gauge US or Imperial units? Neither, I fill in the UK so it it's litres - about 11 and a bit litres to be precise Share this post Link to post Share on other sites
meadowfield 2,758 #13 Posted March 9, 2021 2 hours ago, Tj salyers said: What gauges did you get maybe links just cheap chinese ones Share this post Link to post Share on other sites
TJ5208 1,841 #14 Posted March 9, 2021 do you know were you got them from Share this post Link to post Share on other sites
meadowfield 2,758 #15 Posted March 9, 2021 8 minutes ago, Tj salyers said: do you know were you got them from just on that auction site, sometimes sold in packs of three. They are really basic, but not to hard to wire up. The rev counter needed modifcation as that will not work on a single - theres a thread on that from about 7 years ago. Share this post Link to post Share on other sites
TJ5208 1,841 #16 Posted March 9, 2021 ill try to find it Share this post Link to post Share on other sites
meadowfield 2,758 #17 Posted March 9, 2021 (edited) Doug.... look!!! I put a 12V hour meter on, I’ve done an hour of snow clearing since... Edited March 10, 2021 by meadowfield 1 1 Share this post Link to post Share on other sites
