super a 0 #1 Posted May 28, 2009 My 520H seems to turn better to the left than the right.The wheels seem to turn as far but the front wheels push.It is toed out a little but I don't see an adjustment on the tie rods. Don't worry,nothings going to be alrite. Share this post Link to post Share on other sites
zieg72 209 #2 Posted May 29, 2009 I am speaking only to the 91 and newer 520's with the forward swept axle... The tie rod ends have a nut that you loosen so you can adjust the toe in/out. Loosed both nuts and rotate the solid piece in the middle. Attached Image Share this post Link to post Share on other sites
hodge 6 #3 Posted May 29, 2009 If your tie rods aren't adjustable (therefore, out of adjustment for whatever reason), someone may have hit something and bent a spindle. You may want to look those over, and/or get a set of adjustable tie rods. A friend made me a set with threaded rod, and heim joints on each end. Easy to adjust, and stronger than the stock ones. Or, you could (if yours doesn't have it) get a swept axle set up, with the heavier, adjustable tie rods. Either way, try and determine why it is out. Share this post Link to post Share on other sites
super a 0 #4 Posted May 29, 2009 OK so my 89 doesn't have adj. tie-rods.Will the newer ones fit?I also noticed on the parts site the 520HC has the adj. will these fit? Share this post Link to post Share on other sites
hodge 6 #5 Posted May 29, 2009 I would imagine they will. Share this post Link to post Share on other sites
