Raposo 532 #1 Posted January 29, 2021 Hey guys recently picked up a 416H with the Eaton 1100. Going to be dropping a 16 horse magnum into it and wanted to know what size engine pulley should I run. Don’t want to spin the trans too fast or too slow. Thanks guys. 1 Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,473 #2 Posted January 30, 2021 Gear transmissions with 1-1/8" crankshaft use 4" OD engine pulley #7466. Hydro transmissions with 1-1/8" crankshaft use 5-1/4" OD engine pulley #7443. 3 Share this post Link to post Share on other sites
Raposo 532 #3 Posted January 30, 2021 I was thinking a 5”! Thank you sir! 1 Share this post Link to post Share on other sites
