RICH FRO 16 #1 Posted January 5, 2021 (edited) I am looking for a pully that takes up the tension of the drive belt for a single stage 36 inch snow blower attachment that I will be operating on my C-160 for the first time . Does anybody know where I can get one ? It is the V idler pully I believe part # 7451 Thanks Rich Edited January 5, 2021 by RICH FRO Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,489 #2 Posted January 5, 2021 Flat idler or V-idler? I needed a flat idler in a hurry and robbed one off a mower deck. They happened to be the same part. Garry 1 Share this post Link to post Share on other sites
RICH FRO 16 #3 Posted January 5, 2021 It is the V idler pully . I believe part # 7451 Share this post Link to post Share on other sites
Ed Kennell 42,022 #4 Posted January 5, 2021 (edited) 1 hour ago, RICH FRO said: Does anybody know where I can get one ? Call Lincoln at A-Z Tractor. He is a vendor listed in our classified section. Or you may find one locally at a TSC, Ace, NAPA. Edited January 5, 2021 by Ed Kennell Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,489 #5 Posted January 6, 2021 This is the same pulley that is used on the drive belt for tractors with gear transmissions V-idler pulley - 4.000" OD - Std 7451 replaced by WH 95-7668 or 957668 (Stens 280-313 Std 4.000" OD x 13/64" wide x 3/8" ID) If you want a good one with a real ball bearing in it V-idler pulley - 4.000" OD - HD 52-4580 or 524580 replaced by WH 99-5678 or 995678 (Stens 280-362 HD 4.000" OD x .375" ID (1/4" offset) x 3/4" HT, Napa 7-05485 HD) Garry 1 Share this post Link to post Share on other sites
RICH FRO 16 #6 Posted January 6, 2021 Thanks to all ! That gives me something to do today . Rich Share this post Link to post Share on other sites
