Tom kite 3 #1 Posted December 15, 2020 Need some help have 520h i can't get the starter to come off to replace it. I have taken bolts off it just will come off. Help....... Share this post Link to post Share on other sites
lynnmor 7,716 #2 Posted December 16, 2020 There are 2 mounting bolts, if you removed them it is just a matter of moving the starter about till you find the position where it comes out the right side. You may need to take some of the blower housing screws out for clearance. Look at the photos here. Describe what is going on, is it corroded in place? Share this post Link to post Share on other sites
Tom kite 3 #3 Posted December 16, 2020 starter not working i got a new selaoid and not working. Share this post Link to post Share on other sites
lynnmor 7,716 #4 Posted December 16, 2020 9 hours ago, Tom kite said: starter not working i got a new selaoid and not working. Can't help you without more information. Share this post Link to post Share on other sites
Tom kite 3 #5 Posted December 16, 2020 making a clicking sound when I try to start it , has new battery. Share this post Link to post Share on other sites
953 nut 59,252 #6 Posted December 16, 2020 9 hours ago, Tom kite said: starter not working i got a new selaoid and not working. It may not be the starter or solenoid, could just be a wiring problem. Share this post Link to post Share on other sites
lynnmor 7,716 #7 Posted December 16, 2020 First you were having a problem removing it, now you are getting a clicking sound. What we got here is failure to communicate. A clicking solenoid is usually from low voltage, a bad battery or connection, report the voltage at the starter while the clicking is happening. Share this post Link to post Share on other sites
