Wheel horse d 250 cap and rotor needed

[canam1991 2]

:drool: My d 250 loss spark today so i pulled the cap and the rotor had a hole in it. I need to find a cap and rotor kit. does the parts stores have these(probally not). is there and site to order them from?( send me the link) What car did these engines come out of i got on continentalengines and they say R11,R68,R810,R14? what liter are these i'm guessing 1.6? Thanks :omg:

[Don1977 605]

I went to the Toro/Wheel Horse Site, it says that the D-250's have a Renault Engine.

I would take the parts to a good parts house and see if they have or could order the parts.

[canam1991 2]

i took off the covers on my deck and the bearing for the belt tentioner is worn(gone) does tsc have these in stock or should i go to a pulley store?

[clintonnut 126]

Hi

I am pretty sure if you go to a Napa and order a cap and rotor for a 12v ignition for a Renault dauphine it will work. just make sure you tell them it is a Ducellier distributor and make sure you get a reciept.

For the mower deck pulley your best bet is a place like Bearings Belts and Chain. Or a similar store.

[canam1991 2]

http://shop.advanceautoparts.com/webapp/wc...GRP2041__cap___

are these it?

[clintonnut 126]

??? those are chevy parts.

Heres the parts.

http://www.napaonline.com/masterpages/NOLM...Id=1&SubCatId=1

Charlie

[canam1991 2]

The parts are not showing its just the home page for napa

[canam1991 2]

http://www.napaonline.com/masterpages/NOLM...stributor+Rotor

This rotor has 3 points mine has four?

[clintonnut 126]

Hi

The cap is #ECH-EP163

The rotor is #ECH-EP173

Try these two parts and make sure you get a reciept. I know the points and condensor work but not sure about cap and rotor

Charlie

[Buzz 502]

Hi

The cap is #ECH-EP163

The rotor is #ECH-EP173

Try these two parts and make sure you get a reciept. I know the points and condensor work but not sure about cap and rotor

Charlie

Or take your old parts in and compare them before you buy them Usually you can't return electrical parts. Let us know if they are the right numbers.

[baerpath 517]

D250 ignition parts (correct ones from Beru original equipment for the Gutbrods)

Cap VK 121

condensor ZK 138

rotor EVL 4/6-x

polnts KS 381 V

If you can't get them by you let me know.

Duane