Jump to content
Jerzguy2

Belts

Recommended Posts

Jerzguy2

I just bought a '89 416-8 with an Owan  Motor. I know nothing about these engines, so I hope this isn't a mistake, although it sounds great. What I would like, can anyone supply me with the part # for the drive belt and the mower belt for a 48" mower.  Thank You

Share this post


Link to post
Share on other sites
 
Bill D

103" from engine to deck.  107" for the 48" deck.  I use the blue kevlar belts from TSC.  Napa should have them as well.  They are a 4L or 1/2" wide belt.  Bill

  • Like 1

Share this post


Link to post
Share on other sites
 
Jerzguy2

Thanks, going with Tractor Supply. I appreciate the quick reply

Share this post


Link to post
Share on other sites
 
Bill D

Your welcome.  Glad I saw your post.  How many hours on the engine?  Onans can be difficult to work on and quirky to say the least.  Once you get them dialed in they are okay and make good power.  Bill

Share this post


Link to post
Share on other sites
 
Jerzguy2

I know I should have, but didn't even look. Engine sounds real good, started right up, and needs belts that were never adjusted. Tell you truth, it was only 3 miles away, thought it was a Kohler 16. I have this fear of Onan and I wouldn't even looked at it had I known. With a 48" deck thT sounds ok, small hole to patch, I only paid 250, so how bad could it be?

  • Like 1

Share this post


Link to post
Share on other sites
 
Ed Kennell

$250.... about the going price for a working 48" deck.          How much was the the 416-8 ?   

  • Haha 2

Share this post


Link to post
Share on other sites
 
Jerzguy2

250 tractor & deck

  • Like 1

Share this post


Link to post
Share on other sites
 
Ed Kennell

So, ya got a free tractor.    :woohoo:

Share this post


Link to post
Share on other sites
 
Jerzguy2

I'm a little not thrilled with the Onan, but it sounds great , needs belts and fleshing up. I just want it for snow plowing as I have a 310-8 & 417h for lawn mowing. I figured I couldn't go wrong, had to buy it.

Share this post


Link to post
Share on other sites
 
Bill D

How many hours?  Any pictures?

Share this post


Link to post
Share on other sites
 
Jerzguy2
On 10/18/2020 at 2:53 PM, Bill D said:

103" from engine to deck.  107" for the 48" deck.  I use the blue kevlar belts from TSC.  Napa should have them as well.  They are a 4L or 1/2" wide belt.  Bill

What is the correct TSC drive belt?  From engine to deck, is it 103" or 107"

Share this post


Link to post
Share on other sites
 
Bill D

It should be 103"

Share this post


Link to post
Share on other sites
 
Jerzguy2

Everyone said 83" ??

Share this post


Link to post
Share on other sites
 
Goofey

that would be the transmission drive belt 5/8 or B belt

 

The 107" is between the 3 spindles on the 48 deck

Edited by Goofey
  • Like 1

Share this post


Link to post
Share on other sites
 
pfrederi

103"  Engine to deck

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...