bork 0 #1 Posted May 14, 2009 I'm looking for info on my dad's newer toro WH 15-38 HXL. (B/S 15.5 engine)Has not been run approx 4 years. Drained tank & want to drain carb bowl (before cranking)but has a solenoid? in bottom? How to dissasemble. OR point me to a place to ask. Thanks Share this post Link to post Share on other sites
Confused99 2 #2 Posted May 14, 2009 The fuel valve will unscrew out of the bowl. Share this post Link to post Share on other sites
bork 0 #3 Posted May 14, 2009 I unpluged wires & turned solenoid approx 20 turns but wasnt unscrewing. Share this post Link to post Share on other sites
jaysmith801 0 #4 Posted May 15, 2009 There should be a hex right where it screws onto the carb Share this post Link to post Share on other sites
Confused99 2 #5 Posted May 15, 2009 There should be a hex right where it screws onto the carb Yep. Let us know what you find. Jason Share this post Link to post Share on other sites
bork 0 #6 Posted May 16, 2009 YUP! I just had to get my big but upside down to see under bowl where to put the wrench. Thanks all! Share this post Link to post Share on other sites