Jump to content
Bryan85

Need help please

By Bryan85, in Transmissions and transaxles

Recommended Posts

Bryan85    3

Bryan85
Posted

I have a 1988 416-8 I bought a 7473 belt from the dealer but I put it on and as soon as I pressed the clutch the belt popped off not sure what's going on.

  • Like 2

Share this post

Link to post
Share on other sites
 
[[Template forums/front/topics/postContainer is throwing an error. This theme may be out of date. Run the support tool in the AdminCP to restore the default theme.]]

Bryan85    3

Bryan85
Posted

Yes I feel like the belt might be to big

Share this post

Link to post
Share on other sites
 
[[Template forums/front/topics/postContainer is throwing an error. This theme may be out of date. Run the support tool in the AdminCP to restore the default theme.]] [[Template forums/front/topics/postContainer is throwing an error. This theme may be out of date. Run the support tool in the AdminCP to restore the default theme.]] [[Template forums/front/topics/postContainer is throwing an error. This theme may be out of date. Run the support tool in the AdminCP to restore the default theme.]] [[Template forums/front/topics/postContainer is throwing an error. This theme may be out of date. Run the support tool in the AdminCP to restore the default theme.]]

The Tuul Crib    7,340

The Tuul Crib
Posted

:text-welcomeconfetti:T😎:rs:

:wwp:

Share this post

Link to post
Share on other sites
 
[[Template forums/front/topics/postContainer is throwing an error. This theme may be out of date. Run the support tool in the AdminCP to restore the default theme.]]

Bryan85    3

Bryan85
Posted

Thank you for all the welcome's and this is how I have it on and thank you all for helping.  Got it new in the package with only the number 7430 on it it's an Oregon replacement belt

15987270876357100267403971415877.jpg

  • Like 1

Share this post

Link to post
Share on other sites
 

Bryan85    3

Bryan85
Posted (edited)

It doesn't seem tight the tension pulley doesn't seem far enough up and the pedal does not feel the same 

Edited by Bryan85
Spelled wrong

Share this post

Link to post
Share on other sites
 

The Tuul Crib    7,340

The Tuul Crib
Posted

The belt In the picture looks a little tight. 7473 is the correct part number . I went through the same thing until I got the right one and it all came down to the measurement and the fact that I had a aftermarket belt that was too small. The idler pulley looks like it's too far forward.

Share this post

Link to post
Share on other sites
 

Bryan85    3

Bryan85
Posted

So I just need to buy a Toro brand belt?

Share this post

Link to post
Share on other sites
 

The Tuul Crib    7,340

The Tuul Crib
Posted (edited)

Might be bit more than the others. 
At least it would be the correct one. I 

went thru three different ones before l 

got an oem or toro belt that fit perfect. 
I just went to eBay and typed in

wheelhors7473 oem belt. There

are three different ones for around 35 bucks.

Edited by The Tuul Crib

Share this post

Link to post
Share on other sites
 
[[Template forums/front/topics/postContainer is throwing an error. This theme may be out of date. Run the support tool in the AdminCP to restore the default theme.]] [[Template forums/front/topics/postContainer is throwing an error. This theme may be out of date. Run the support tool in the AdminCP to restore the default theme.]] [[Template forums/front/topics/postContainer is throwing an error. This theme may be out of date. Run the support tool in the AdminCP to restore the default theme.]]

Tgalo    121

Tgalo
Posted

Just to add, I too went though this with my 418. 3 belts and finally went to Toro and it fit .  It was 50 bucks but it was a half size that no one else had... Cheers

  • Like 1

Share this post

Link to post
Share on other sites
 
[[Template forums/front/topics/postContainer is throwing an error. This theme may be out of date. Run the support tool in the AdminCP to restore the default theme.]] [[Template forums/front/topics/postContainer is throwing an error. This theme may be out of date. Run the support tool in the AdminCP to restore the default theme.]] [[Template forums/front/topics/postContainer is throwing an error. This theme may be out of date. Run the support tool in the AdminCP to restore the default theme.]] [[Template forums/front/topics/postContainer is throwing an error. This theme may be out of date. Run the support tool in the AdminCP to restore the default theme.]] [[Template forums/front/topics/postContainer is throwing an error. This theme may be out of date. Run the support tool in the AdminCP to restore the default theme.]]

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Go To Topic Listing
×
×
  • Create New...