Jump to content
Sign in to follow this  
Chuck14025

520H Won't start - won't even 'click

Recommended Posts

Chuck14025

 

 

NEW INFORMATION

1. Cleaned all wiring, etc. turned key engine, STARTED right up.

2. Shut it down, tried to RESTART - not even a click. TOTALLY DEAD.

3. 12.7 volts on the battery. Tested all 3 relays - they all behave the same.

4. Connections tight. Solenoid works. Starter works.

5. HOT wire from battery + to starter solenoid where the Light Blue wire attaches - STARTS RIGHT UP. 

 

QUESTION IS: Why isn't the Light Blue wire to the solenoid not being energized? What are the possible scenarios?

 

1. Intermittent operation of the key switch?

2. An opening on the coil side of the electric circuit? 

3. Other possibilities. 

 

Thanks for the help.  Coffee and donuts are ready. 

Share this post


Link to post
Share on other sites
 
lynnmor

Safety switches and ignition switch are good place start.  Download the demystification guide in the manuals section.

Share this post


Link to post
Share on other sites
 
squonk

Did you actually take the 9 pin connector apart and thoroughly clean the connections. Muffler heat destroys those molex connectors.

 

Share this post


Link to post
Share on other sites
 
Chuck14025

Thanks for the help guys.  I got it. Bad starter solenoid. 

  • Like 1

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×
×
  • Create New...