Bill D 2,248 #1 Posted July 1, 2020 Anyone got any tips and tricks for replacing the PTO side crankshaft seal on an M16? Thanks. Bill Share this post Link to post Share on other sites
953 nut 59,999 #2 Posted July 1, 2020 (edited) If you use an awl to poke a hole in the metal part of the seal you can run a sheet metal screw into the hole and then clamp some vise-grip pliers onto the screw and tap the vise-grips with a small hammer while pulling. Edited July 1, 2020 by 953 nut fat finger Share this post Link to post Share on other sites
