upstate yank 219 #1 Posted June 28, 2020 well guys i am in need of the correct belt size for a wheel horse model 314-8 with the 14 horse motor; the belt in need is the one that runs the pulleys ;as the one i have now is no good 'any information sure would be appreciated ;thanks guys Share this post Link to post Share on other sites
Sparky-(Admin) 23,166 #2 Posted June 28, 2020 12 minutes ago, upstate yank said: the one that runs the pulleys Runs the pulleys is kinda vague. You want the drive belt (motor to tranny) or mowing deck drive belt (motor to center pulley on deck) or the mowing deck spindle drive belt? Share this post Link to post Share on other sites
upstate yank 219 #3 Posted June 29, 2020 16 minutes ago, Sparky said: Runs the pulleys is kinda vague. You want the drive belt (motor to tranny) or mowing deck drive belt (motor to center pulley on deck) or the mowing deck spindle drive belt? sorry for the miss understanding here but i need the belt that runs mower deck spindles; as the belt for the motor to the center pulley is new ;again sorry Share this post Link to post Share on other sites
RandyLittrell 3,906 #4 Posted June 29, 2020 Howdy to another Missouri fellow!! Randy 1 Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,491 #5 Posted June 29, 2020 Width of cut? Side or rear discharge? Garry Share this post Link to post Share on other sites
upstate yank 219 #6 Posted June 29, 2020 7 hours ago, gwest_ca said: Width of cut? Side or rear discharge? Garry side discharge ;it has the 3 blades the beck is a 48 inch ' Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,491 #7 Posted July 1, 2020 Belts are on this page.Click on the picture of the manual Garry Share this post Link to post Share on other sites
upstate yank 219 #8 Posted July 6, 2020 On 6/28/2020 at 7:15 PM, upstate yank said: sorry for the miss understanding here but i need the belt that runs mower deck spindles; as the belt for the motor to the center pulley is new ;again sorry thanks for the up date but i was able to find the correct belt size Share this post Link to post Share on other sites
upstate yank 219 #9 Posted July 6, 2020 (edited) On 6/28/2020 at 8:46 PM, RandyLittrell said: Howdy to another Missouri fellow!! Randy well howdy from the spring field area as i grew up on this find old horses and at one time years back in the great state of new york where i was born and raised upstate not the city as most think' i had over 8 horses in the barn and most attachments i did the stupid thing to sell them off as being a trucker for close to 40 years i really didn't have time for them and when me being over the road for years and really not having the time for them i sold them off as i thought with me being gone for weeks my family came first as far as bills and food ;so yes being stupid i sold them off as again my family came first ;but as the years rolled by and the taxes and the deep snow we decided to leave that so we relocated to the show me state which after years i wished that we did not move here as even being a road driver 48 state and more my youngest daughter was killed my a drunk that ran a stop sign 'it has been hard and due that her lost i gave up the road and now being retired i am back to the old horses which again i have 6 to tinker with ;as far as any wheel horse i always keep parts 'as we never know what we will need ;again it is a pleasure to know you and heck who knows that we might need a part as i save every part for a wheel horse Edited July 6, 2020 by upstate yank Share this post Link to post Share on other sites
upstate yank 219 #10 Posted July 6, 2020 On 6/29/2020 at 12:24 PM, upstate yank said: side discharge ;it has the 3 blades the beck is a 48 inch ' sorry it is a 46 inch cut and i was able to get the correct belt Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,491 #11 Posted July 6, 2020 The 300-Series of tractors do not use a 46" deck. Decks are sized by their width of cut. 42" decks have the cut height adjuster on the right side and 48" decks have the cut height adjuster on the left side. Garry Share this post Link to post Share on other sites
