Shrek 12 #1 Posted June 26, 2020 Just a quick question for the gurus. A local guy is parting out his C121. I'm looking for tie rods for my C85. Are they interchangeable? The next step is unbolting mine and comparing them in person. Thanks in advance! 1 Share this post Link to post Share on other sites
rmaynard 16,372 #2 Posted June 26, 2020 (edited) They should be. Most of the newer ones are adjustable, so they are basically universal. Edited June 26, 2020 by rmaynard 1 Share this post Link to post Share on other sites
Lee1977 7,224 #3 Posted June 26, 2020 They will work. I wouldn't give much for them they are mostly worn out. Wish you were closer, I have two original set I would give you. They are 30 years old can't say how good they are. I have changed all mine to heims joints. Got tired of beating them back together. I have had heims joint on my C-120 since 1989 and they are still as good as they were new. 2 Share this post Link to post Share on other sites
Shrek 12 #4 Posted June 26, 2020 Yes, the Heims are nice and look bullet proof. Buy the best, cry once. Thanks for the quick replies! Share this post Link to post Share on other sites
953 nut 60,355 #5 Posted June 26, 2020 One of our vendors makes and sells new top quality steering parts that will last forever. Give them a call and they will fix you up. https://www.wheelhorsepartsandmore.com/about-us.html 1 Share this post Link to post Share on other sites
peter lena 9,311 #6 Posted June 26, 2020 agree with lee above on the heim joints , they are bombproof and i have used them on a number of trouble movement areas. you can make up your own or buy completed units, i always have spare heim joints in my tool kit. 3/8x 24 fine steel thread rod , with two 3/8 male/female heim joints are quick and easy , pete Share this post Link to post Share on other sites
