Mike C160 251 #1 Posted June 22, 2020 (edited) Anyone know what the model this ol girl might be and if its worth anything? this is the only photo I have. Havent seen it in person yet. Thanks and Cheers Edited June 22, 2020 by Mike C160 1 1 Share this post Link to post Share on other sites
ebinmaine 73,002 #2 Posted June 22, 2020 It's in the 62 to 64 year range. Others might be able to narrow it down a little. Value of course has many variables like condition, location. The early round hoods are certainly a very capable machine and also collectable. 1 Share this post Link to post Share on other sites
71_Bronco 1,072 #3 Posted June 22, 2020 Exhaust doesn't look stock to me, so it may or may not be the original motor. Looks like a newer seat too, and I think I spy a ratchet strap holding the belt guard on. Doesn't look too bad, considering it's almost 60 years old. Hood looks to be straight and not cut up (at least the side we can see), which is a plus. Definitely worth saving (at least in my opinion). Lots of, what looks like, factory paint and good solid steel. People have saved, and restored, much worse looking machines. I'd be tempted to leave the patina on it if it's all factory paint still. Should clean up nice with a little elbow grease. 3 Share this post Link to post Share on other sites
953 nut 60,356 #4 Posted June 22, 2020 9 hours ago, Mike C160 said: if its worth anything? If you look at listings on any is worth a king's ransom. If it is close by and runs and drives well and the only negative conditions are the seat, belt guard and front tires I would say it should be worth about $ 350 US. 1 Share this post Link to post Share on other sites
ebinmaine 73,002 #5 Posted June 22, 2020 54 minutes ago, 953 nut said: I would say it should be worth about $ 350 US. Not to be argumentative but just as a point of fact it would be worth at least twice that up here in the Northeast 1 Share this post Link to post Share on other sites
oliver2-44 10,781 #6 Posted June 22, 2020 Not sure whats going on with the long bolt and washers for the front axle pin? Definately worth a trip to see in person and confirm whats all there and what works and what needs repair 1 Share this post Link to post Share on other sites
WHX?? 51,916 #7 Posted June 22, 2020 702 or 753 gets my vote. Some kind of homemade bracket on the front Jim. 1 Share this post Link to post Share on other sites
Mike C160 251 #8 Posted June 23, 2020 Ok Thanks guys. Its quite a drive and I have requested more photos first. Stay tuned. 3 Share this post Link to post Share on other sites
prondzy 3,889 #9 Posted June 23, 2020 Looks like a 62 with that front axle. 2 Share this post Link to post Share on other sites
