Wes Welbaum 2 #1 Posted June 19, 2020 I am interested in a front end loader for my 1973 wheel horse.. I have read about generic bucket attachments, but have not found any available. I have a friend who has the ability and tools to make one. are there any plans floating around for such a project? Thanks 1 Share this post Link to post Share on other sites
Pullstart 66,829 #2 Posted June 19, 2020 Check out PF Engineering. They sell plans for building bucket attachments 3 Share this post Link to post Share on other sites
wallfish 18,131 #3 Posted June 20, 2020 PF Engineering has some good thought out plans and well worth the investment. But here are some basic plans to look at 2 Share this post Link to post Share on other sites
littleredrider 409 #4 Posted June 20, 2020 I have the plans from PF Engineering. Sometimes I think he gives TOO much information. I think it can be overwhelming looking it all over. I didn't build mine, but mine was homemade. They are pretty basic, and once you look at it, it won't be hard to build one. The hardest part is hydraulics, also the most expensive. I could get some pics of mine, since it's all torn apart. If its on the tractor, I won't finish it and will use it lol 1 Share this post Link to post Share on other sites
Tractorhead 9,212 #5 Posted June 20, 2020 I would say it depends on, what you wanna do with it. Bucket with Quick changer, Bucket allone fix mounted, Bucket with optional Croc byte, Bucket to dig As differently as the use for is, as differently are the construction. I would suggest to a quick changer, to extend your use Share this post Link to post Share on other sites