cpic1 0 #1 Posted May 27, 2020 Hi, does anybody know why the loader will not lift a load? No leaks and full where it should be with oil Share this post Link to post Share on other sites
JoeM 8,348 #2 Posted May 27, 2020 Some common causes over loaded belt / PTO slipping cylinder bypass dumping over relief. Relief set to low . I am sure there is an ark loader trouble shooting guide here somewhere. Gary may point you in that direction. Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,490 #3 Posted May 27, 2020 Here is what we have for the Ark loaders https://www.wheelhorseforum.com/search/?q=ark&quick=1&type=downloads_file Garry Share this post Link to post Share on other sites
