76c12091520h 3,312 #1 Posted May 24, 2020 Just wanted to publicly thank our friend Terry @ redoyourhorse for a little project he undertook for me recently . I've been looking for quite some time for NOS control knobs for my 520 hydro that i'm restoring, and I've also had numerous people contact me looking for these same items. They just don't exist. Most of us with 300 thru 500 series hydro tractors have the knobs, but the print is completely worn off. A couple of weeks ago I sent my good (but worn) knobs to Terry and I think he solved this problem pretty well. He will now be offering these for sale along with all the other great stuff he offers. 5 16 Share this post Link to post Share on other sites
dclarke 4,011 #2 Posted May 24, 2020 Terry's the best!! 6 1 Share this post Link to post Share on other sites
Tractorhead 8,615 #3 Posted May 24, 2020 Good solution. 1 Share this post Link to post Share on other sites
Pollack Pete 2,273 #4 Posted May 24, 2020 (edited) Nice......VERY nice.I've had 4 or 5 520-H's over the last 5 years or so.Still have one right now.I NEVER knew there was any writing on those knobs.Until now.Mine must have all been worn off.Thanks foe sharing. Edited May 24, 2020 by Pollack Pete 2 Share this post Link to post Share on other sites
squonk 39,047 #5 Posted May 24, 2020 Don't put them on backwards! 3 Share this post Link to post Share on other sites
953 nut 52,046 #6 Posted May 24, 2020 8 hours ago, dclarke said: Terry's the best!! 2 4 Share this post Link to post Share on other sites
lynnmor 6,836 #7 Posted May 24, 2020 Those knobs are nasty when you are doing something that requires almost constant use, the sharp edges around the indent eats into your hands if not wearing gloves. The later models have round knobs. Share this post Link to post Share on other sites
Vinylguy 4,666 #8 Posted May 27, 2020 Finally got the knobs listed Brian check them out by clicking the image below. thanks for your help getting these designed. 2 Share this post Link to post Share on other sites
