JAinVA 4,638 #1 Posted May 18, 2020 I need dust boots for a set of 520 tie rods.Parts tree does not list them and Toro here is a non starter.Any other options?Thanks in advance. Share this post Link to post Share on other sites
lynnmor 7,858 #2 Posted May 18, 2020 This was asked before and I posted one possibility, but no answer if it worked. Here Share this post Link to post Share on other sites
oliver2-44 10,781 #3 Posted May 18, 2020 Will these from Glenn work? Share this post Link to post Share on other sites
lynnmor 7,858 #4 Posted May 18, 2020 If you scroll down, the two large ones may be correct. Share this post Link to post Share on other sites
SPINJIM 1,986 #5 Posted May 18, 2020 Sorry for my lack of knowledge, but how does one replace the dust boots? Do they stretch enough to slide up over the hex head with some help from some oil? Jim Share this post Link to post Share on other sites
squonk 43,944 #6 Posted May 18, 2020 Are we talking the dust boots that the grease oozes out of when someone goes nuts with a grease gun? Auto parts stores sell universal dust boots. https://www.dormanproducts.com/c-289-dust-boots.aspx Share this post Link to post Share on other sites
SPINJIM 1,986 #7 Posted May 18, 2020 (edited) The picture above shows the small dust boots on the tie rod ends without any kind of zerk fitting for grease. That's what I would like to replace without having to replace the whole tie rod end. But the 520 does have the grease fittings, so I guess that the larger boots are what the original thread was asking about. Jim Edited May 18, 2020 by SPINJIM correction Share this post Link to post Share on other sites
