Jump to content
Sign in to follow this  
jerry potaracke

carburetor

Recommended Posts

jerry potaracke

does anybody know if the 142-0661a carburetor from asap performance will work on a b43m gao16 onan engine  i have a wheel horse d160 with fuel issues    thanks 

Share this post


Link to post
Share on other sites
 
lynnmor

A link to the company and the part might help.

Share this post


Link to post
Share on other sites
 
pacer

Is this the carb you're talking about - it shows 0660 but no 0661 ---- However, this should be what would go on the B43 series. (I have a B43 and that is the carb)

 

But do you really want to spend $440 for one???? There are rebuild kits out there and that carb is just plain simple to rebuild. If it has had this wonderful ethanol fuel been running thru it then it no doubt needs a rebuild!

 

What are your probs with it? - surging/pulsating is typical, or something else? Onans are rather notorious in being finicky tuning.

 

I chased a problem on mine til I was at the point of getting another engine but I decided to - ONE MORE - time going through all the cks, ignition, wiring, carb (which I had rebuilt 2-3 times!)etc and sure enough when I pulled the points/condenser and was looking them over - once AGAIN! - I notice a tiny crack in the insulation on the condenser which was VERY close to the case. When I kinda bent the wire it was very brittle and cracked open badly -- so I replaced it and voila!! problem solved!! Hours and hours messing with it and all along it was a faulty condenser!

https://www.partsfortechs.com/asapcart/bmz_cache/1/15f4f7ffffd0f7702269e50d6af3fc5a.image.293x335.JPG

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
Sign in to follow this  

×
×
  • Create New...