bigbore1934 3 #1 Posted April 23, 2020 Sorry, I don't have a photo but I have a leak in the fuel tank where the shut-off valve goes into the tank,It looks like a metal valve in a rubber grommet on the bottom of the plastic tank.Any idea before I tear it apart?It doesn't look like the vavle is leaking but the rubber between it and the tank is....not really sure how it's made!Any help is appreciated! Share this post Link to post Share on other sites
bigbore1934 3 #3 Posted April 23, 2020 where can I get one? Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,524 #4 Posted April 23, 2020 Have a repair shop nearby? Many makes use the same rubber bushing so should be in stock. Garry Share this post Link to post Share on other sites
roadapples 6,983 #5 Posted April 24, 2020 8 hours ago, bigbore1934 said: where can I get one? EBay..... 1 Share this post Link to post Share on other sites
Dan.gerous 2,696 #6 Posted April 24, 2020 1 hour ago, roadapples said: EBay..... I just ordered two sets with valves and got the second set for free on eBay - bonus! 1 1 Share this post Link to post Share on other sites
Retired Wrencher 5,840 #7 Posted April 24, 2020 If you have to change the valve might as well do all the lines and filter. I always run 2 filters cheap insurance. Take the tank out and clean in side if needed. It very easy to in stall. 1st install bushing then shut off. Aline shut off to hose. Enjoy. 1 Share this post Link to post Share on other sites
