Still learning, lol HelpPlz! Snoblower removal

[12Horse Paladin 1,038]

jus like the title states.

2 pics to maybe help yall guide me, lol

Got the blowet up on 2x4s n rest detatched.

Cant figure how to get it off the attatch a matic

Thanks in advance!😊

[Pullstart 66,829]

If you push the little 1/4” pin  on the left front side of the tach-a-matic, it’ll push a 1-1/2” or so round puck out the way.  The lever on the bottom side of the tach-a-matic will push backwards and let the snowblower drop down.

 

 

[12Horse Paladin 1,038]

Ok, i tried that but didnt have success.  

Ill try again.

Thankyou!

[WVHillbilly520H 10,376]

What Kevin said put in pics... You may need to pry the tang back it smack it with a hammer if the blower has pressure on it.

Edited April 19, 2020 by WVHillbilly520H

[Pullstart 66,829]

Here’s the pin.

 

 

 

*edit...  I see Jeff replied with a much better picture!

Edited April 19, 2020 by pullstart

[Pullstart 66,829]

And now I see in Jeff’s pictures too, I said push the bottom lever backwards.  Pull the lever forward, it’ll move the fixture backwards!

 

Might need a little tunk tunk from a hammer or a 2x4 

[12Horse Paladin 1,038]

Thanks all, got it easy peasy, no bfh needed!

Ya kno im new at this...but I sure made it harder than i needed! WH musta been geniuses...

But itd help if my memory wasnt so short!😉🤣

Edited April 20, 2020 by 12Horse Paladin
cant type!

[lynnmor 7,824]

All the information should be in the owners manual, download one on this site.

[Chestnut 315]

This was a question I was going to ask if 12Horse Paladin didn't ask it first. Thanks 12Horse for asking.