Larry P. 45 #1 Posted April 19, 2020 Hello, I'm just getting ready to mount the ignition coil onto the shroud of my C160 project, when I noticed that when you shake the ignition coil it sounds like there is liquid inside it. I know years ago some ignition coils were filled with oil to keep them cool. Is the K341 ignition coil oil filled or do I need to start looking for a new ignition coil. Thanks for your help, Larry 2 Share this post Link to post Share on other sites
ZXT 2,401 #2 Posted April 19, 2020 2 hours ago, Larry P. said: Hello, I'm just getting ready to mount the ignition coil onto the shroud of my C160 project, when I noticed that when you shake the ignition coil it sounds like there is liquid inside it. I know years ago some ignition coils were filled with oil to keep them cool. Is the K341 ignition coil oil filled or do I need to start looking for a new ignition coil. Thanks for your help, Larry Coils are oil filled to help cool them. Assuming this is an internal resistor coil, you ought to be fine. A coil is a coil! 3 Share this post Link to post Share on other sites
squonk 43,821 #3 Posted April 19, 2020 Larry. I assume you got the flywheel screen ok? If you decide you need a coil Napa # IC64SB is a good replacement Share this post Link to post Share on other sites
Larry P. 45 #4 Posted April 19, 2020 Thanks everyone for your response. I'll assume the coil is supposed to be oil filled. My next question is what the heck are these parts??? I have these two parts and I cant figure out what they go to. I can't find them on any parts list. Any help would be greatly appreciated. Share this post Link to post Share on other sites
