leeave96 490 #1 Posted March 28, 2020 Want to replace the fuel line on a 520H from the tank to the engine. Got the line unhooked from the tank and fuel pump. Thought it would be as easy as pulling the old fuel line out to the rear, with the new fuel line attached to it following along. I can’t get the old fuel line to move at all! Seems like I did this before on another Wheelhorse years ago... What am I missing? Before I dissemble the tractor down to the frame (just kidding), any sage advice on how to remove the old fuel line is much appreciated. Thanks! Bill Share this post Link to post Share on other sites
lynnmor 7,858 #2 Posted March 28, 2020 Take the side cover off, there you will see the strap holding the fuel line out of harms way. Share this post Link to post Share on other sites
leeave96 490 #3 Posted March 28, 2020 9 minutes ago, lynnmor said: Take the side cover off, there you will see the strap holding the fuel line out of harms way. Thanks, looking from the rear, I assume the left side cover? Share this post Link to post Share on other sites
