NEW parts inventory

[76c12091520h 3,608]

  We have over $100,000 worth of current , NOS,  discontinued, and obsolete  inventory to fit Wheel Horse , Toro,  Kohler , Onan, Tecumseh ,  & Briggs and Stratton . Pm here, or call / text  with needs. Shipping available on all orders ( Continental US only ) . Stocking most currently available replacement parts for classic Wheel Horse tractors, including belts, cables, pulleys,  & switches ( all oem, no aftermarket )

 

 

 

 

 

 

 

 

 

 

 

 

Edited April 2, 2023 by 76c12091520h
add photos

[rmaynard 15,393]

That's a lot of parts. How far back do the Wheel Horse parts go? If we were to give you a part number, would you be able to quickly ascertain whether or not you have it?

[Pullstart 62,698]

Correct me if I’m wrong... your father was a dealer and you were cleaning up his inventory?  Once the stock is sold out will you be done, or are you starting back up?

[76c12091520h 3,608]

 All parts are inventoried; the best way is to give me the part #'s and or model and serial #'s.  I can tell you within minutes of seeing your messages if we have it or not. Our inventory covers mostly late 60's thru mid 2000's. There is a small amount of early stuff but it's little things like gears, belts, bearings, seals etc. We never stocked sheetmetal , large items,  accessories, etc. because it didn't sell.  Dad was a dealer , but I'm getting into it more and more, buying new old stock when I can, and getting into used parts sales also.

[TomB 2]

I'm looking for new or used (original part) fuel pump for a K161.  Let me know if you have or any recommendations where to find.  Thanks

[Louis70 0]

I am looking for a rim that will fit my 520h. They are very hard to come by anything would help me out at this point. 

[Hencho 1]

 Hello,

I’m reworking my Sundstrand 90-2001 pump. Do you have any parts for this?

[Lost.soul.collecter 76]

I'm needing 4 axle seals part number 100443 do you have them if so message me with a price please and thanks

[Lost.soul.collecter 76]

Also a price on them head lights lenses and hud caps thanks

[Jack695 0]

Looking for a spindle shaft for a mower deck.

Deck is for a D160

Deck model # 65-48XSO1

Part no. on Shaft Spindle is 104890.  Part of Spindle Assy 104891.  Deck year 1976.

Thanks so much in advance.

Regards John Price

695retired@gmail.com

[Jack695 0]

How about mower blades?  16in long, for a 48in deck (65-48SX01)?  And I see you have some of those scalloped edge dome washers- I'd like a price for 6 of those.  Any idea where I could get an Ammeter for the dash of my D160?  

[Jack695 0]

Forgot:  If you dont have this, maybe you could point me in the right direction-- I need a gas cap.  Its for the large tank the D series use.  I think it was originally galvanized and 2 1/4" maybe?  Cant find an original so far.  The one I have just doesnt fit.  I wouldnt mind one of the ones with a fill needle in it if you know one that will fit....Appreciate all your help.  By the way, I think I'm going to need another of your Spindle Assemblies.  Hope you have one left!

[tractorking 4]

I am looking for a throttle cross shaft with the attached arm (ball stud from factory) to fit a Kohler 14hp  Carter Carb K321S,spec # is 60137.Any suggestions? The shaft from a Walbro carb will work,but does not have the ball stud.

[Darb1964 1,039]

I need a head light lens for my 1067,looks like the ones you have photo of. $

Thanks

[Jkirn1965 0]

I am looking for a headlight lens to a 1972 GT 14 wheel horse 

[76c12091520h 3,608]

6 hours ago, Jkirn1965 said:

I am looking for a headlight lens to a 1972 GT 14 wheel horse 

PM sent 

[manant 57]

I need 3 double d mower blades for a 48" deck.  The part number is 100202.

[76c12091520h 3,608]

6 hours ago, manant said:

I need 3 double d mower blades for a 48" deck.  The part number is 100202.

PM sent

 

[kevincva1 24]

looking for two parts

1- 2879 cable clip

2-105971 cable clamp

 

Both parts are for the throttle cable on a C101

[kitkit 133]

need a key switch for a 1277  ,thank you 

[mark v 0]

On 2/9/2020 at 9:21 PM, 76c12091520h said:

 All parts are inventoried; the best way is to give me the part #'s and or model and serial #'s.  I can tell you within minutes of seeing your messages if we have it or not. Our inventory covers mostly late 60's thru mid 2000's. There is a small amount of early stuff but it's little things like gears, belts, bearings, seals etc. We never stocked sheetmetal , large items,  accessories, etc. because it didn't sell.  Dad was a dealer , but I'm getting into it more and more, buying new old stock when I can, and getting into used parts sales also.

I am looking for the drive belt for my C121  tractor 91-12KS01-13771   ?  178 ID tag   Made 1978.  I would like the part number and the cost ideally would like 2

 

mark v.     Mav2e2@gmail.com

[76c12091520h 3,608]

2 hours ago, mark v said:

I am looking for the drive belt for my C121  tractor 91-12KS01-13771   ?  178 ID tag   Made 1978.  I would like the part number and the cost ideally would like 2

 

mark v.     Mav2e2@gmail.com

PM sent

[wallter large 2]

how about steering wheel 7469 insert

[76c12091520h 3,608]

14 minutes ago, wallter large said:

how about steering wheel 7469 insert

 

[khawk 0]

I am looking for a 1611 pulley.