Horse Fanatic 49 #1 Posted April 27, 2009 Hi all, Terry the Vinyl guy is willing to make the "HYDRO" decals that go on the side of the hoodstand of late 1980's hydro machines. He needs a photo of the decal to make it. I have destroyed the decals on the two machines I have that need them when repainting the hoodstand and now have nothing to photograph. Can someone take a photo of theirs and send it to me or send it directly to Terry? Thanks in advance, Glenn Share this post Link to post Share on other sites
Horse Fanatic 49 #2 Posted May 1, 2009 No one's got a maroon stripe hydro? Share this post Link to post Share on other sites
kpinnc 10,743 #3 Posted May 1, 2009 I can get you one tomorrow. Kevin Share this post Link to post Share on other sites
hummod 0 #4 Posted May 1, 2009 While we are at it, can we get an "8-Speed" one too? I can supply a decal that I was able to remove from my 417-8. I would be good for at least four sets (left and right side). Just let me know where to send it. Thanks, Larry (hummod) Share this post Link to post Share on other sites
kpinnc 10,743 #5 Posted May 1, 2009 I have both. I'll post them tonight. Kevin Share this post Link to post Share on other sites
buckrancher 2,675 #6 Posted May 2, 2009 yes I need two 8-speed decals too :omg: Share this post Link to post Share on other sites
kpinnc 10,743 #7 Posted May 2, 2009 OK, here ya go. Both decals are 7/8 of an inch tall. The "8-SPEED" is 7 and 1/4 inches long. It's on my 310-8: The "HYDRO" decal is 5 and 1/4 inches long. It's on my 518/ 520-H: TD should be able to square you away with that. Kevin Share this post Link to post Share on other sites
Horse Fanatic 49 #8 Posted May 2, 2009 Thanks very much!!! Glenn Share this post Link to post Share on other sites
