donnie crawford 1 #1 Posted January 22, 2020 (edited) Manual has two numbers for drive belt 81"and 83" which is it for the tractor I listed as title Edited January 22, 2020 by donnie crawford Share this post Link to post Share on other sites
Stepney 2,313 #2 Posted January 22, 2020 I .. think the 81" belongs to the hydro-static drive. The longer one was for the manual transmission. Could probably tell for sure by putting your model number into the Toro master parts viewer. 1 1 Share this post Link to post Share on other sites
donnie crawford 1 #3 Posted January 22, 2020 Thank you that gives starting point. Wasn't even thinking about the hydro would be different size. don't have model number completely worn off Share this post Link to post Share on other sites
ebinmaine 62,359 #4 Posted January 22, 2020 18 minutes ago, donnie crawford said: Thank you that gives starting point. Wasn't even thinking about the hydro would be different size. don't have model number completely worn off A trick we use is to take a pic of it with a phone and magnify or modify the pic. Mess with the lighting or color and sometimes it'll show up. Share this post Link to post Share on other sites
gwest_ca-(File Mod) 10,444 #5 Posted January 22, 2020 The belt number and size has been added to this page. Click on the picture Garry Share this post Link to post Share on other sites