Dirtpoor 131 #1 Posted December 17, 2019 Ok I just got started on 1 of the tractors I bought. Its a B 80 4 Speed. 4 3 3 Share this post Link to post Share on other sites
The Tuul Crib 7,339 #2 Posted December 17, 2019 Take lots of pictures cause youll need them going back together. Don't know how far your going with your rebuild but what l used to clean up the rust is the electrolysis method. It removes paint and all! Post lots of pics!! 2 1 Share this post Link to post Share on other sites
dclarke 4,082 #3 Posted December 17, 2019 Looks like you have a good start on it. There’s lots of help here if you have any questions and If you need a hand with anything just send me a message. 1 3 2 Share this post Link to post Share on other sites
Dirtpoor 131 #4 Posted December 17, 2019 Thanks. I will need lots of pictures. Next week the car will be out of the garage. So I will have lots of room 👍 1 1 Share this post Link to post Share on other sites
Dirtpoor 131 #5 Posted December 17, 2019 2 hours ago, dclarke said: Looks like you have a good start on it. There’s lots of help here if you have any questions and If you need a hand with anything just send me a message. If you get bored and want to take something apart just let me know. I have two lol (I’m just doing one at a time) Thanks for the offer too👍 Share this post Link to post Share on other sites
The Tuul Crib 7,339 #6 Posted December 17, 2019 Just be careful if you take the car out of the garage don't forget to put the car back! Share this post Link to post Share on other sites
Dirtpoor 131 #7 Posted December 17, 2019 37 minutes ago, The Tool Crib said: Just be careful if you take the car out of the garage don't forget to put the car back! Its not going back in my garage. My very good neighbor said I can park it in his garage !!!!😁 And these came in today 3 1 Share this post Link to post Share on other sites
dclarke 4,082 #8 Posted December 17, 2019 48 minutes ago, Dirtpoor said: If you get bored and want to take something apart just let me know. I have two lol (I’m just doing one at a time) Thanks for the offer too👍 Lol, I’ve got 2 projects apart in my garage now and 2 more apart in the shed. I’ve always had trouble finishing one before taking the next one apart.... What all are you gonna do on this B80? I’ve had several of those trannys apart if you need help on that. 1 1 Share this post Link to post Share on other sites
The Tuul Crib 7,339 #9 Posted December 18, 2019 11 minutes ago, Dirtpoor said: Its not going back in my garage. My very good neighbor said I can park it in his garage !!!!😁 And these came in today That my friend is a good ... no great neighbor! Share the red! 1 1 Share this post Link to post Share on other sites
Dirtpoor 131 #10 Posted December 18, 2019 59 minutes ago, dclarke said: Lol, I’ve got 2 projects apart in my garage now and 2 more apart in the shed. I’ve always had trouble finishing one before taking the next one apart.... What all are you gonna do on this B80? I’ve had several of those trannys apart if you need help on that. Whoa. I’m just going to do one at a time. I just want to clean it up and paint it replace all warn parts and anything that has baling wire on it. Haven’t seen any on the B80 yet. But the raider has several. The tie rod is wired on 2 2 1 Share this post Link to post Share on other sites
ZXT 2,401 #11 Posted December 18, 2019 24 minutes ago, Dirtpoor said: That just adds character! 3 Share this post Link to post Share on other sites
ebinmaine 72,569 #12 Posted December 18, 2019 5 hours ago, dclarke said: Looks like you have a good start on it. There’s lots of help here if you have any questions and If you need a hand with anything just send me a message That's pretty much what I was thinking. If you need parts, help or both send me a PM. And post LOTS of pictures. Us children likes our pictures.... 6 Share this post Link to post Share on other sites
MikMacMike 490 #13 Posted December 18, 2019 6 hours ago, Dirtpoor said: Whoa. I’m just going to do one at a time. I just want to clean it up and paint it replace all warn parts and anything that has baling wire on it. Haven’t seen any on the B80 yet. But the raider has several. The tie rod is wired on Just wee bit of McGivering lol. 2 Share this post Link to post Share on other sites
Pullstart 66,690 #14 Posted December 18, 2019 At what point did the bailing wire operator look at his job, stick his hands on his hips with his chest stuck out with pride and say, “Yeah, that’ll do just fine!”? 3 1 Share this post Link to post Share on other sites
953 nut 59,890 #15 Posted December 18, 2019 21 minutes ago, pullstart said: “Yeah, that’ll do just fine! Nothing wrong with bailing wire repair job! It has gotten me home a few times, but sooner or later I guess a slightly more permanent repair would be in order. 2 1 Share this post Link to post Share on other sites
Bigtrx34 321 #16 Posted December 19, 2019 Just going to leave this right here 1 1 5 Share this post Link to post Share on other sites
ebinmaine 72,569 #17 Posted December 19, 2019 30 minutes ago, Bigtrx34 said: Just going to leave this right here If it can't be fixed with the above items just junk it. Can it. Toss it. Heave it. Chuck it. Or paint it green???? 2 3 Share this post Link to post Share on other sites
dclarke 4,082 #18 Posted December 19, 2019 Well this afternoon “Dirtpoor” stopped by for a visit and some horse talk, turns out he lives in the same neighborhood as I do, I also had a chance to give his tractors a quick once over and he’s got a couple of nice projects. Welcome to the forum and the addiction “Dirt”. Nice to meet you! It’s good to have another W. H. guy so close. 4 Share this post Link to post Share on other sites
Dirtpoor 131 #19 Posted December 19, 2019 1 hour ago, dclarke said: Well this afternoon “Dirtpoor” stopped by for a visit and some horse talk, turns out he lives in the same neighborhood as I do, I also had a chance to give his tractors a quick once over and he’s got a couple of nice projects. Welcome to the forum and the addiction “Dirt”. Nice to meet you! It’s good to have another W. H. guy so close. It was great meeting Denny tonight. His tractor collection is something else. His work is excellent. It’s great to have someone with his experience living in the same neighborhood. 👍 Denny when you get bored you are welcome to come help me 😁 2 1 1 Share this post Link to post Share on other sites
Pullstart 66,690 #20 Posted December 19, 2019 See, I told ya he’s a pretty alright guy! 1 Share this post Link to post Share on other sites
Dirtpoor 131 #21 Posted December 19, 2019 6 minutes ago, pullstart said: See, I told ya he’s a pretty alright guy! He is a damn nice guy and his tractors are like art. It’s going to be great to have a professional living right behind me for advice 👍 2 Share this post Link to post Share on other sites
Dirtpoor 131 #22 Posted December 20, 2019 Trying the patina look on the raider 10 its the look Denny asked me to try. I tried it on the hood. 2 Share this post Link to post Share on other sites
Dirtpoor 131 #23 Posted December 22, 2019 Alright made a little progress tonight Denny came by. We spend some time talking and beating on the right rear wheel. It was rusted on. Got it off with a sledgehammer. Denny gave me some rear rims to replace the back ones. In the last picture the tie rods have these flat pieces metal that stop the wheels when turned so far. Denny said he has never seen those before. Has anyone else seen the stops. 1 Share this post Link to post Share on other sites
Pullstart 66,690 #24 Posted December 22, 2019 What was your patina method? I have seen those stops before, but can’t say if I have any like that... Share this post Link to post Share on other sites
MikMacMike 490 #25 Posted December 22, 2019 18 hours ago, Dirtpoor said: Alright made a little progress tonight Denny came by. We spend some time talking and beating on the right rear wheel. It was rusted on. Got it off with a sledgehammer. Denny gave me some rear rims to replace the back ones. In the last picture the tie rods have these flat pieces metal that stop the wheels when turned so far. Denny said he has never seen those before. Has anyone else seen the stops. Yes but mine is shorter then yours, also mine is only on the right side steering linkage too. But my WH came with a right side discharge deck so I just figured the left side they wanted a very tight turning radious for cutting around sharp corners. But that was just my guess when I noticed it. Mike 1 Share this post Link to post Share on other sites
