Tecumseh V60-70052C on WT-244 Tiller

[DBlackston 298]

I have a Tecumseh V60-70052C on a WT-244 Tiller and it is missing all of the throttle plate, and governor and throttle linkages.

 

Can anyone help me figure out the part numbers I am missing and does anyone know a good source. 

 

I have not found a parts diagram for this specific model motor.

 

 

 

 

 

 

 

[ebinmaine 72,706]

I'll take a look in the parts piles later today or tomorrow.

There's a box of various carb items and a Tecumseh (except the block) 

 

[The Tuul Crib 7,339]

 I don't have anything with the motor parts list but here is a parts list for the tiller itself. Hope you can use this 

[gwest_ca-(File Mod) 11,488]

According to a service bulletin issued in 1965 that includes the 1966 models the engine used on the WT-244 was a V60-70094D. Can not find anything on it either. 

 

Found these. There are 365 different spec numbers for the V60 that appear to be in numerical order but they are not. You have to look through them all. Looks like 3 or 4 different lists make up this one list.

https://www.partstree.com/search/?type=model&term=v60

 

Garry

[formariz 12,045]

Take a look at this one. I believe they are identical parts to the V55.

 

[ebinmaine 72,706]

I looked around a little bit yesterday but I forgot to let you know. I wasn't able to find any linkage rods. The only thing I had was some kind of a plate with a couple of pivot points that looks like maybe it mounted to the block?