cpic1 0 #1 Posted November 29, 2019 Does anyone know what size belt I need for a ark loader from PTO to hydraulic pump on a C-161 Share this post Link to post Share on other sites
ZXT 2,401 #2 Posted November 29, 2019 1 hour ago, cpic1 said: Does anyone know what size belt I need for a ark loader from PTO to hydraulic pump on a C-161 I'm not sure what belt you will need, but posting the model # of the loader if you could find it would help immensely. There are many on here that are extremely knowledgeable about loaders but there are variations between them. Do you have any pictures of your tractor and/or loader? We love pictures! Share this post Link to post Share on other sites
cschannuth 3,817 #3 Posted November 29, 2019 I built my own loader and pump mount so I had to use trial and error. I had some 1/2” cotton rope that I wrapped around both pulleys for a rough measurement and then went to the local Carquest and bought that length and two sizes longer and two sizes shorter. Once I found the right length I took the other 4 back. Share this post Link to post Share on other sites
cpic1 0 #4 Posted November 29, 2019 Thank You. I will do that Share this post Link to post Share on other sites
gwest_ca-(File Mod) 11,500 #5 Posted November 29, 2019 Not many of the manuals we have list a belt. Those that do show a Gates 6827 which is 1/2" x 27". https://www.wheelhorseforum.com/search/?&q=ark&type=downloads_file&search_and_or=or Garry Share this post Link to post Share on other sites