bigred520h 4 #1 Posted November 22, 2019 Need some help from someone with a 97 520h or similar. I took the led cluster panel off to access my headlight switch and now I can't remember what direction it came off. Tired of fighting it. If someone could post me a picture of under the hood similar to what I have shown that would be awesome! Thanks -Kyle Share this post Link to post Share on other sites
troutbum70 857 #2 Posted November 22, 2019 I have found for me its best to get pictures before I take things, just sayin it works for me part of the time. Some I have to take pictures in multiple steps. Good luck hopefully some one comes along with pictures. Share this post Link to post Share on other sites
lynnmor 6,813 #3 Posted November 22, 2019 I don't know what you mean by "direction" but I can post a photo later. If I knew where the interference might be, perhaps I could take a photo of that area. Share this post Link to post Share on other sites
The Tuul Crib 7,332 #4 Posted November 22, 2019 (edited) Looks to me the wires are on the bottom side of the piece. look at The picture of where the screws go through the holes that should tell you Edited November 22, 2019 by The Tool Crib 1 Share this post Link to post Share on other sites
bigred520h 4 #5 Posted November 22, 2019 I thought the harness would go down also, but I couldn't get the holes to line up without running into interference. I'll give it another try tonight. If someone has a picture that might help me out. Thanks. Share this post Link to post Share on other sites
lynnmor 6,813 #6 Posted November 22, 2019 Hope this helps: 1 Share this post Link to post Share on other sites
pfrederi 17,169 #7 Posted November 23, 2019 No garden tractor should have that many wires!!! 1 Share this post Link to post Share on other sites
lynnmor 6,813 #8 Posted November 23, 2019 10 minutes ago, pfrederi said: No garden tractor should have that many wires!!! And that ain't the half of it, there is a real snake pit containing relays just below the pictured mess. Share this post Link to post Share on other sites
bigred520h 4 #9 Posted November 23, 2019 Ha! I knew it! I was trying to install it upside down. A picture is worth a thousand words!! Share this post Link to post Share on other sites