budman2 57 #26 Posted October 18, 2019 I only see one relay, mine has three! robert Share this post Link to post Share on other sites
ZXT 2,401 #27 Posted October 18, 2019 (edited) You could get a generic relay socket and solder it into your harness. This way you’ll have new connectors that haven’t been exposed to the elements for the last 30 years. Should be available at any auto parts store and we could walk you through the process of installing it if you needed help. Edited October 18, 2019 by ZXT 1 Share this post Link to post Share on other sites
budman2 57 #28 Posted October 18, 2019 Thanks guys didn't know they sold them at an auto parts store, going to check that out today! My friend that went by the handle Bowtie used to help me with all the wiring issues as I am not good at it, Bowtie ( Brent ) passed away a few years ago, I sure miss talking with him. Been restoring these for about 15 years and still don't know as much as he did! budman2 1 Share this post Link to post Share on other sites
richmondred01 2,307 #29 Posted October 18, 2019 Yes some 520’s had three some had two. It depends on the year. The sockets and relays are the same. All the best. Share this post Link to post Share on other sites
953 nut 60,103 #30 Posted October 18, 2019 8 hours ago, budman2 said: Bowtie used to help me with all the wiring issues as I am not good at it, Bowtie ( Brent ) passed away a few years ago, He provided a lot of good information on this site, we miss him too. 1 Share this post Link to post Share on other sites
