Snow plow needed 416-8

[WarrenOstroff 0]

I have an old 416-8 that was refurbished and given to me by a friend. I'd like to put a snow plow on it.... What info would i have to give you to tell me which one I need....

 

 

Edited October 12, 2019 by WarrenOstroff
wrong model

[WarrenOstroff 0]

I have an old 416-8 that was refurbished and given to me by a friend. I'd like to put a snow plow on it.... What info would i have to give you to tell me which one I need....

 

 

[WVHillbilly520H 10,376]

Just about any Wheel Horse snow plow made since 1973... They'll look like this.

[The Tuul Crib 7,340]

8 minutes ago, WVHillbilly520H said:

Just about any Wheel Horse snow plow made since 1973... They'll look like this.

[gwest_ca-(File Mod) 11,757]

Here is a list of them. Where 2 models numbers are shown one is the basic unit and the other is the completing kit to make it fit the application.

 

1968 model 6-4111 - First to fit LONG & SHORT frame tractors and first to mount under the rear axle - replaced by

1969 model [6-4112 + 6-9621]

1970-73 model [6-4113 + 6-9622]

1973-74 model [6-4113 + 6-9623]

1974 model [6-4114 + 6-9624]

1974 model 6-2131

1975 model 6-2132

1976 model 6-2133

1976 model 66-42BC01

1977 model 76-42BC01

1978 model 86-42BC01

1979 model 96-42BC01

1980 model 06-42BC01

1981-1984 model 06-42BC02 (Up to here they are 42" wide)

1984-1989 model 06-48BC01 (They are now 48" wide) - replaced by the following

1990 model 06-48BC02

1991-1993 model 06-48BC03

1993-2001 model 79350

2002 2004-2009 2012 model 79364

 

Garry

[Mickwhitt 5,201]

I have a two wheeler with a small plough fitted,  it only mounts on a round shaft so making a dummy mount for the front of my horse should mean I can swap between the two machines. Let's hope it snows this year in the uk lol 

[WarrenOstroff 0]

thank you all....... very helpful.....