The Tuul Crib 7,332 #1 Posted October 8, 2019 Have been looking through the manual section and can't seem to find the part number for my drive belt on my 414-8 . Anyone have it handy? Thanx Randy Share this post Link to post Share on other sites
gwest_ca-(File Mod) 10,488 #2 Posted October 8, 2019 Have tried to add the drive belts to the file description pages for the parts lists for each model. Not necessary to download anything. Click on the picture Garry Share this post Link to post Share on other sites
ebinmaine 62,982 #3 Posted October 8, 2019 Randy when you figure out what it is let me know. I may have one laying around. Share this post Link to post Share on other sites
The Tuul Crib 7,332 #4 Posted October 8, 2019 2 minutes ago, ebinmaine said: Randy when you figure out what it is let me know. I may have one laying around. Well Eric it appears that the part number is 7473 it's a 5/8 x 82 belt Share this post Link to post Share on other sites
The Tuul Crib 7,332 #5 Posted October 8, 2019 8 minutes ago, gwest_ca said: Have tried to add the drive belts to the file description pages for the parts lists for each model. Not necessary to download anything. Click on the picture Garry Thanx !!! Share this post Link to post Share on other sites
ebinmaine 62,982 #6 Posted October 8, 2019 1 minute ago, The Tool Crib said: Well Eric it appears that the part number is 7473 it's a 5/8 x 82 belt Okay I can check it later this evening Share this post Link to post Share on other sites
The Tuul Crib 7,332 #7 Posted October 8, 2019 8 minutes ago, ebinmaine said: Okay I can check it later this evening Thanx buddy! 1 Share this post Link to post Share on other sites
The Tuul Crib 7,332 #8 Posted October 12, 2019 I just received my belt today through the mail for my drive belt. I ordered a 7473 part number which is 5/8 x 82" long . It seems to be extremely a tight fit! Could this belt be the wrong one I need to be a little bit longer perhaps ? Share this post Link to post Share on other sites
Lee1977 6,211 #9 Posted October 12, 2019 (edited) Are you sure it's installed right? I found this right after I bought a 312-8. It worked like that don't know how long the belt would have lasted. Edited October 12, 2019 by Lee1977 Share this post Link to post Share on other sites
The Tuul Crib 7,332 #10 Posted October 12, 2019 Yes it was installed right. That would wear out a belt no time . Without even putting it on the idler pulley it was tight The number supposed to be a 7473 82 inches long but I'm thinking it should've been 82 1/2 to 82 and three-quarter . Share this post Link to post Share on other sites
ebinmaine 62,982 #11 Posted October 13, 2019 Randy what brand of belt did you get? I've found that makes all the difference in the world. Shouldn't. But it can. Share this post Link to post Share on other sites
