Mudrig150 298 #1 Posted October 8, 2019 So, I've noticed a common issue with the KT/Magnum twin engines. They are always missing the LH head tin. A lot of previous owners clean out grass behind the tin and never put it back on, so it gets lost. I've seen many a post about people looking for the LH head tin. I'm making a basic blueprint for the tin, and once I get ahold of my snapper LT18, I'll be able to get detailed measurements of it. Shouldn't be too hard to make, it's just cutting some thin aluminum then bending. 2 1 Share this post Link to post Share on other sites
Mudrig150 298 #2 Posted October 9, 2019 (edited) Basic sketch. Edited October 9, 2019 by Mudrig150 1 Share this post Link to post Share on other sites
Sparky-(Admin) 19,439 #3 Posted October 10, 2019 Good idea. Folks have no idea how important those are for proper cooling. Share this post Link to post Share on other sites
Mudrig150 298 #4 Posted October 10, 2019 1 hour ago, Sparky said: Good idea. Folks have no idea how important those are for proper cooling. Yep. My M18 has the head tin, but can't say the same for a lot of others. Gonna copy the original design, then get some 1/16" steel to replicate them. I'm gonna make probably 20-25 tins, and sell em for 20$-25$ plus Shipping. I don't have many tools but if I get some good metal shears (we have electric shears but they broke on 1/8" steel) and a good set of drill bits it should be a breeze. Share this post Link to post Share on other sites
Mudrig150 298 #5 Posted October 22, 2019 Got a template made. Now to order a sheet of steel, a couple hole bits, and some new metal sheers. Share this post Link to post Share on other sites
19richie66 16,877 #6 Posted October 22, 2019 Found them on fleabay before Share this post Link to post Share on other sites
