Jump to content
Gas Man

Hello from Southern Illinois

Recommended Posts

Gas Man

I just bought a C-175 with a mower deck and snow blade (not running) for $150.  I'm pretty sure I paid to much for it (sitting on 4 flat tires) but, I just love the way it looks! Even though there rear tires are flat and have huge cracks, those 23x10.50 bar grip tread make it look tuff!!  Plus the owner said "It was running when I parked it" in 2003!!  I intend to do a full on restoration after I hear it run.  It has 1525 hours on the clock.  That sounds like a TON for this little guy. 

  • Like 4

Share this post


Link to post
Share on other sites
 
Sparky

:WRS:

  I love the Black-Hood years! I’ve had a whole bunch of em come thru here and there is always at least one in my small collection, right now it’s a C105.

  Wide Ag tires do have a cool look don’t they B). Even flat with dry cracking they catch yer eye! If they don’t hold air maybe a set of tubes will get em back in service.E780797D-3B76-4E68-8742-5047BE89C402.jpeg

  FA8E6734-B5D1-456F-802A-2133EC630304.jpeg

  

  • Like 3

Share this post


Link to post
Share on other sites
 
Gas Man

My are cracked to a point that I can stick my hand inside the tire!!  That's ok...If it runs good, it will look even better with new tires.  The ones that are on it are 23x10.50's.  I found a 24x12.00.  I wonder if they would fit?

Doesn't 1500 hours sound like a LOT?

  • Sad 1

Share this post


Link to post
Share on other sites
 
ebinmaine

:WRS:

 

You most certainly did NOT pay too much.

The plow is actually worth just about what you paid for the whole tractor.

 

So, buy a plow get a free tractor.

You done well.

 

1500 hours is plenty, yes, but given proper parts replacement and maintenance it'll be around for a while.

 

Tire fit depends on tire BRAND as well as size.

12 is fairly wide for those rims but may fit fine.

 

 

  • Like 1

Share this post


Link to post
Share on other sites
 
AMC RULES

787811653_RS-WelcomeWagon.jpg.fb3ba0aa90d34a2772af270fbdf978b6.jpg.7ed327494645aeed801620267ac5f964.jpg

Share this post


Link to post
Share on other sites
 
Sparky
35 minutes ago, Gas Man said:

 I found a 24x12.00.  I wonder if they would fit?

Doesn't 1500 hours sound like a LOT?

Those tires are probably not going to fit well. WH’s with the fuel tank under the seat don’t have as much clearance for wide tires and if you ever want to run tire chains it’s even worse. 

  The hours are up there but if it’s got compression on both cylinders you’ll be fine. For a buck and a half you can’t go wrong!

  • Like 1

Share this post


Link to post
Share on other sites
 
oliver2-44

:wwp:

Share this post


Link to post
Share on other sites
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • rustyedge1
      By rustyedge1
      Used solid dozer blade 6-3111 for Lawn Ranger
      Pick up only, CASH only
      Message me for more details.
      Dan
    • rustyedge1
      By rustyedge1
      39" Dozer Blade for early Lawn Ranger. All welds look good and the nuts on cutting edge are free and turn. Grease zerk is also free and working. 
      PM for details. Cash only. No shipping. Pick up only at my location.
      Solid blade. PM for details. 200.00 OBO cash only.












    • Joe Warren
      By Joe Warren
      Wheel Horse 42” Snow Blade
       
      Wheel Horse part # 06-42BB02   1979-86
       
      Used On:            
      B-81 (6 speed), B-82, B-85, B-111 (6 speed), B-112, B-115, B-165 (5 speed),
      LT-832, LT-1100, LT-1136, LT-1137, LT-1600, LT-1637. LT-1642,
      SB-371, YT-12-A,
      208-3, 211-3, 211-5, 211-A, 216-5,  
       
      One  New Old Stock still in the original shipping carton, and one assembled used blade in very good  condition (shown in photos)
      $199 for NOS unit and $149 for used unit shown.
       
      Local pick up in Easton MA. I occasionally drive to Bridgewater NJ and may be able to deliver to MA, RI, CT, Eastern NY, or northern NJ.
       
      Please private message me if you are interested in purchasing.
       
      Thank you,
      Joe




    • Pawel
      By Pawel
      New Wheelhorse owner living in the Northeast. There is a snow blade for sale but dont know if it will fit my 1989 252H. The  id tag is reading 96-42BC01-06389 on the phot sent to me. The Toro site states I need a 06-42BK01. 
    • cschannuth
      By cschannuth
      Since I picked up a larger 54" blade for my C-161 I was wondering if I could add the rear axle bracket to my 606 and use my old 42" snow blade on it?
×
×
  • Create New...